Accessories and Tools
Accessories and Tools
Base Plates
Base Plates
Cantilever Gate System
Cantilever Gate System
DIY Sliding Gate Kit
DIY Sliding Gate Kit
End Caps
End Caps
Fence Panels
Fence Panels
Fencing Brackets
Fencing Brackets
Fencing Spears
Fencing Spears
Floor Tracks
Floor Tracks
Gate Closers
Gate Closers
Gate Hinges
Gate Hinges
Gate Holders
Gate Holders
Gate Locks and Latches
Gate Locks and Latches
Gate Stops
Gate Stops
Gate Wheels
Gate Wheels
Gatemaster
Gatemaster
Letter Boxes
Letter Boxes
Locinox
Locinox
Motor Accessories
Motor Accessories
Post Bases
Post Bases
Rollers and Brackets
Rollers and Brackets
Sliding Gate Motors
Sliding Gate Motors
Swing Gate Motors
Swing Gate Motors
Tube Connectors
Tube Connectors
Touch Up Paints
Touch Up Paints
Wrought Iron
Wrought Iron
Garage Door Motors
Garage Door Motors
TigerTech
TigerTech
Overhead Sliding Gate System
Overhead Sliding Gate System
Round Pipe Fitting
Round Pipe Fitting
WH171
Top Guide Roller for Sliding gate size 40x100mm M18 Black

The Wh370 Top Guide Roller for Sliding Gate is a high-quality accessory designed to enhance the performance of sliding gates. With a size of 40x100mm, this guide roller ensures smooth and effortless operation for your gate. It is made of durable materials to withstand daily use and environmental conditions. The Wh370 Guide Roller is specifically designed to be installed on top posts, providing reliable guidance and support. The black color adds a sleek and modern touch to your gate. Upgrade your sliding gate with this top guide roller for improved functionality and convenience.

$ 9.95 9.950000000000001 AUD
GM820
Genuine Beninca 4 button Remote TO.GO4A


Features:

  • Transmitter Frequency: 433 MHz
  • Battery: 23A 12V
  • Coding Type: Rolling
  • Control up to 4 doors 
Battery Type: 23A
Battery Access Type: Tool Required
AS62368.1 Compliant: Not applicable
Battery Included: Yes
Contains Coin Battery: No


$ 40.00 40.0 AUD
ET365
Centsys Photon Smart Fully wireless PE Safety Beams

Centsys Photon Smart Fully wireless PE Safety Beams

Main features:

  • Connects wirelessly to your SMART solution – saves time and money
  • Pair and align in seconds
  • Beautifully styled – adds an air of sophistication to your swing or sliding gate
  • Outstanding reliability offering up to 2 years of battery life
  • Long range – brings safety to even the widest entrance gates
  • Fully sealed unit – prevents insect ingress
  • Can be easily added to sites with existing hard-wired beam sets

Technical Specifications:
Power supply 2 x AA Alkaline Batteries1 (supplied for each transmitter and receiver)
Battery life >2 years
Battery-low indication Notified via MyCentsys Pro Mobile Application
Maximum operating distance 30m
Alignment between beams2 Automatic – 1m circle @ 10m
Maximum Operating Distance Photon SMΔRT Receiver to SMΔRT Controller 10m
Operating temperature -15°C to +65°C
Operating humidity 0 - 90° (non-condensing)
Housing material ABS
Lens material PC
Degree of Protection IP54
Packaging weight 200g
Packaging dimensions Length: 137mm Width: 72mm Height: 58mm


Brochure Click

Installation  Click

$ 172.27 172.27 AUD
FK341
Mortice Lock - Primary mortice, 60mm backset, Satin Chrome

The Mortice Lock is a high-quality locking solution designed for maximum security. With a 60mm backset, this lock provides a reliable and durable mechanism for your doors and gates. The satin chrome finish adds a touch of elegance and complements various architectural styles. This lock features the Lockwood 3572 primary mortice lock, known for its strength and reliability. It offers advanced security features such as a deadlock function, ensuring that your property is well-protected. Suitable for residential, commercial, and industrial applications, the Mortice Lock is a trusted choice for those seeking robust and reliable security solutions.


Compatible with Electric striker  FK660

$ 63.59 63.59 AUD
1001002030B
Duragal Steel 100x100x2.0mm 3000mm long Black

Duragal Steel 100x100x2.0mm 3000mm long Black

$ 107.27 107.27 AUD
1001002024B
Duragal Steel 100x100x2.0mm 2400mm long Black

Duragal Steel 100x100x2.0mm 2400mm long Black

$ 79.55 79.55 AUD
LKBL080
Gatemaster Super Digital Lock Double Sided Keypad to fit 10-30 mm gate frame with Lever handle

The Gatemaster Super Lock is a double-sided keypad designed to fit 10-30mm gate frames. With its durable construction and user-friendly keypad, this lock provides enhanced security and convenient access control for your gate. The double-sided keypad allows authorized individuals to enter a personal code for easy and controlled entry.

Download PDF

$ 453.09 453.09000000000003 AUD
GM605
Universal RX Multi Receiver

Description

Introducing the GM605

Product Introduction
  • Name: Universal Radio Receiver 433-868 MHz for Came, Liftmaster,Hormann HSM, Marantec
  • Brand selector: With 8 dip switches user can make different combination for different remote brands.
  • It can worrk with many main different brands in the market, like FAAC, BFT, DITEC, CAME, HORMMAN, BENINCA, MHOUSE, NICE….
  • Multi frequency: 300-868mhz
  •  Learn Button and LED: There are 2 independent channels. Each channel has independent learn button S1, S2 and L1, L2.
  • Power Input Selector: This receiver can work at AC/DC 12V~30V. However, it’s better to change the PIS according to the power input.
  • If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V
  • Distance: 50-100 meters
  • Very mini size: 5.5cm*4.5cm*1.0cm
  • One receiver can work with 400 codes
  • It don’t interference other remotes and receivers
  • Compatible brands: nice flors, Marantec 433.92mhz, FAAC SLH rolling code 433.92mhz and 868mhz, liftmaster 310, 390, 433.92mhz, 315mhz, Hormann and Marantec, Berner 868mhz, Prastel, Clemsa Mastercode 433.92mhz, DITEC 433 and 315mhz, V2, Aprimatic, JCM GO 868MHZ, JCM TECH, PNC, FORSA, ALMA, ROPER 868MHZ, BFT, FACC… and many other main brands in the market
  • Programming a new remote 1) First, select the correct brand for remote that will be entry (by dip switch) 2) Press the learning button 1 or 2, the corresponding LED turns on 3) Press the button on the remote, the led 1 or led 2 flashes4 times, the remote button is learned successfully
  • 2 independent relays
  • Delete code:
  • Press and hold either learn button. The LED will start flash. Keep this button pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered


$ 59.09 59.09 AUD
MOT375
240V Beninca Double Swing Gate Motor TOM5024E - Complete Kit

Beninca Double Swing Gate Motor TOM5024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL –5.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 5 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 9.4 kg
Motor Voltage

24 volts DC

Standby Current

0mA

Maximum Current

5.5A

Motor Power

89W

Maximum Thrust

1500Nm

Opening Time

19"

Maximum Gate Width

5000mm

Duty Cycle

80%

Height (mm)

114mm

Width (mm)

96mm

Length (mm)

1575mm

Weight (kg)

9.4 Kg

IP Rating

IP44

 

$ 1,795.00 $ 1,617.27 1617.27 AUD
MOT374
240V Beninca Single Swing Gate Motor TOM5024E - Complete Kit

Beninca Single Swing Gate Motor TOM5024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL –5.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 5 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 9.4 kg
Motor Voltage

24 volts DC

Standby Current

0mA

Maximum Current

5.5A

Motor Power

89W

Maximum Thrust

1500Nm

Opening Time

19"

Maximum Gate Width

5000mm

Duty Cycle

80%

Height (mm)

114mm

Width (mm)

96mm

Length (mm)

1575mm

Weight (kg)

9.4 Kg

IP Rating

IP44


$ 1,268.18 1268.18 AUD
MOT372
240V Beninca Double Swing Gate Motor TOM3024E - Complete Kit

Beninca Double Swing Gate Motor TOM3024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL – 3.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 3 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 10 kg
Motor Voltage

24 volts DC

Standby Current

0mA

Maximum Current

5.5A

Motor Power

89W

Maximum Thrust

1800Nm

Opening Time

9-21 seconds to 90 degrees

Maximum Gate Width

3000mm

Duty Cycle

80%

Height (mm)

132mm

Width (mm)

88mm

Length (mm)

796mm

Weight (kg)

8.2 Kg

IP Rating

IP44


$ 1,399.09 1399.09 AUD
MOT371
240V Beninca Single Swing Gate Motor TOM3024E - Complete Kit

Beninca Single Swing Gate Motor TOM3024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL – 3.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 3 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 10 kg
Motor Voltage

24 volts DC

Standby Current

0mA

Maximum Current

5.5A

Motor Power

89W

Maximum Thrust

1800Nm

Opening Time

9-21 seconds to 90 degrees

Maximum Gate Width

3000mm

Duty Cycle

80%

Height (mm)

132mm

Width (mm)

88mm

Length (mm)

796mm

Weight (kg)

8.2 Kg

IP Rating

IP44


$ 995.45 995.45 AUD
GMSG706
240V Beninca BULL624SW 600kg - Complete Kit

Italian Sliding Gate Motor Beninca BULL424 SW 24V 600kg- Motor kit

 

The BULL624SW is a 24 volt motor designed for residential and commercial sliding gates up to 600kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 600KG The BULL624SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL424SW is designed for residential and commercial sliding automatic gates up to 600kg in weight.

24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 240 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Control unit with trimmers and dip-switches | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor (2 x 1.2 Ah) | Anti-crushing system with amperometric obstacle detection.

The BULL624SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.

 Motor Voltage - 24 volts DC 

Current Standby - 8mA 

Current at use - 3.2A 

Motor power - 80W 

Maximum thrust - 428N 

Operating speed - 11 metres per minute (adjustable) 

Maximum gate size - 600 kg 

Duty cycle - 80% 

Height - 330mm Width - 326mm Depth - 140mm 

Weight - 7.6 Kg 

IP rating - IP44

 

 

Additional information

Weight 15 kg
Motor Voltage

24 volts DC

Standby Current

8mA

Maximum Current

0.4A

Motor Power

80W

Maximum Thrust

428N

Operating Speed

11 Metres per minute

Maximum Gate Weight

600 Kg

IP Rating

IP44

Height (mm)

330mm

Width (mm)

140mm

Length (mm)

326mm

Weight (kg)

10.2 Kg

Duty Cycle

80%

 

$ 799.00 $ 635.45 635.45 AUD
GMSG702
240V Beninca BULL424SW 450kg - Complete Kit

Italian Sliding Gate Motor Beninca BULL424 SW 24V 450kg- Motor kit

 

The BULL424SW is a 24 volt motor designed for residential and commercial sliding gates up to 450kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 450KG The BULL424SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL424SW is designed for residential and commercial sliding automatic gates up to 450kg in weight.

24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 240 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Control unit with trimmers and dip-switches | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor (2 x 1.2 Ah) | Anti-crushing system with amperometric obstacle detection.

The BULL424SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.

 Motor Voltage - 24 volts DC 

Current Standby - 8mA 

Current at use - 3.2A 

Motor power - 80W 

Maximum thrust - 428N 

Operating speed - 11 metres per minute (adjustable) 

Maximum gate size - 450 kg 

Duty cycle - 80% 

Height - 330mm Width - 326mm Depth - 140mm 

Weight - 7.6 Kg 

IP rating - IP44


 

Additional information

Weight 15 kg
Motor Voltage

24 volts DC

Standby Current

8mA

Maximum Current

0.4A

Motor Power

80W

Maximum Thrust

428N

Operating Speed

11 Metres per minute

Maximum Gate Weight

400 Kg

IP Rating

IP44

Height (mm)

330mm

Width (mm)

140mm

Length (mm)

326mm

Weight (kg)

10.2 Kg

Duty Cycle

80%

Battery Back up $185Wireless Keypad $218.50


$ 690.00 $ 590.00 590.0 AUD
HN490
D&D BadAss Bolt-on Face Mount Self-Closing Hinge Set 140kg / Set

    The Self-Closing Badass Hinge Set is specifically designed for gates weighing up to 140 kg,  The bolt-on, self-closing gate hinges are easy to install and adjust for perfect installation. Compatible for use on aluminium gates for non-welding and high-traffic gates to ensure correct movement. Horizontally adjustable for perfect installations that ensures proper gate function. The Bolt-On BadAss was designed to be used on gates where welding the hinges to the gate and the end post is not an option.

    Opens to 180° for unobstructed pass through
    • Achieve gate gaps as small as 13mm
    • Horizontally adjustable from 13mm to 25mm for precise installation
    • Both weld-on and bolt-on models available
    • No greasing or maintenance required on sealed bearings. EVER!
    • Horizontal adjustability is ideal for panic bar installations
    • 5 tension-adjustment settings
    • Self-closing maximum gate weight: 200kg (with 2 closers) CI3835FM 
    • Self-closing maximum gate weight: 140kg (with a closer and plain hinge set) CI3860FM

    Gate Application Pedestrian Gate, Driveway Gate - Double, Driveway Gate - Single, Pet Gate, Playground Gate, Public/Commercial Gate, Automated/Electric Gate, Security Gate, Privacy Gate
    Gate Type Self-Closing
    Gate Material Steel/Ornamental Iron
    Approx Gate Size 1.5m x 2m (6ft W x 8ft H)
    Gate Frame/Post Shape Square-to-Square, Square-to-Round
    Min Post Size 38mm+ (1½")
    Ideal Gate Gap 13mm-25mm (½"- 1")
    Fixing Method Weld-on, Bolt-on
    Colour/Finish Zinc

     


    $ 432.27 432.27 AUD
    CP858
    Sunbury - Aluminium Capital 150x150mm

    Sunbury Aluminium Capital - 125x125

    The Sunbury Aluminium Capital is a stunning architectural element designed to enhance the beauty of columns and pillars. Made from high-quality aluminum, this capital showcases a unique and eye-catching design that adds a touch of elegance to any architectural project. With its intricate detailing and precise craftsmanship, the Sunbury Aluminium Capital creates a focal point that captures attention and elevates the visual appeal of the space. Whether used in residential or commercial applications, this capital is built to withstand the test of time, ensuring durability and long-lasting performance. Transform your columns and pillars into works of art with the Sunbury Aluminium Capital.

    $ 104.55 104.55 AUD
    HN724
    Safetech AlfaHinge Neutral Tension Hinge for Gates up to 28kg: Black, No Legs

    The Neutral Tension Gate Hinge is designed for gates weighing up to 28kg and features a no alignment leg design.  The absence of alignment legs simplifies the installation process and allows for flexible positioning. With its durable construction, the Neutral Tension Gate Hinge offers long-lasting performance. Whether for residential or light commercial use, this hinge is an excellent choice for smaller gates.


    Hold weights up to 28kg

    Materials

    Engineered Polymers, Rust Resistang Stainless-Steel Pins & Springs

    Adjustment

    Vertical

    Colour

    Black

    Max Holding Weight (KG)

    28

    Number of Legs

    No Legs

    Application

    Metal or Timber Gates, Pool Gates

    $ 13.63 13.63 AUD
    HGSK251
    Swing Gate hinges Shackle Weld on Hinges 20mm pin in Dark Grey (Pair)

    The Swing Gate Hinges Shackle Weld-on Hinges are heavy-duty hinges designed for swing gates that require strength and reliability. With a 20mm pin size, these hinges offer robust performance and smooth gate operation. The shackle design helps prevent gate sagging and ensures proper alignment. These hinges are sold as a pair and feature a weld-on installation for secure and permanent attachment. Suitable for industrial and commercial applications, the Swing Gate Hinges Shackle Weld-on Hinges provide long-lasting durability and reliable gate functionality.


    Colour: Dark Grey

    Hold weights up to 600kg


    Installation instruction for Weld on hinges

    1. Weld the sockets onto the gate itself.
    2. Measure the distance between the sockets.
    3. Weld the pins onto your post, one at the bottom, and one at the top. Make sure you have left plenty of room at the bottom so the gate clears the ground. Double check the pins are the same distance apart as your sockets. The pins should be pointing up.
    4. Lift your gate up and drop it on the pins.

    To make sure your gate is secure :

    1. Weld the bottom pin onto your post & pin pointing up and your bottom socket on your gate.
    2. Sit your gate on the bottom pin.
    3. Weld the top socket to your gate.
    4. Drop the pin into the top socket. so Pin is pointing down
    5. Weld the pin to the post.

    Tip: Measure correctly before welding. If need to change anything you will need to cut them off and re-weld them again.


    $ 23.50 23.5 AUD
    MT207
    SS - Scroll 300x100x12x6mm

    SS - Scroll  300x110x65x12x6mm

    Tigerlink Hardware offer a large range of Zinc coated steel Iron Scrolls that are easy to weld and are the perfect touch for decorations.
     
    These scrolls are ideal for giving your gates and fences a modern stylish boost and they can also be used as balcony and staircase railing decorations too.
     

    Please contact us for Bulk price & availability

    scrolls on top of the gate

    S Scroll inserted into a gate

    $ 7.18 7.18 AUD