Motor Accessories

2 pieces replacement gate key for manual release for Merlin and Grifco gate motors

Automatic Wireless Vehicle Micro E-Loop Kit

The e-Loop Micro offers a fantastic low-cost solution to domestic gate control, offering a simple installation, impressive battery life for the form factor and a discreet and sleek design. Packaged with an e-Trans 20 as an all-in-one solution, the e-Loop Micro kit is the perfect product for any gate installer; offering a reasonably priced to up-sell a vehicle detection on a traditional gate installation.

Compact Profile – Height: 27mm | Diameter: 110mm

The e-Loop Micro’s Vehicle Detection System relies on magnetometer sensors to detect approaching vehicles. Upon detection, the system transmits this information to a nearby Microtech transceiver, facilitating gate activation/traffic control. Installation involves affixing sensors to the surface of entry or exit passages using dyna-bolts. These sensors are designed to withstand the rigors of vehicle traffic.

Automatic Wireless Vehicle Post Mount E-Loop Kit

Ideal for demanding environments, the e-Loop in-ground features all the functionality of the commercial with the added advantage of a in-ground installation. Perfect for low clearance vehicles, forklifts, tracked vehicles and heavy equipment.

***CANNOT BE PLACED TOO CLOSE TO A MOVING STEEL GATE

Automatic Wireless Vehicle Detector In-Ground E-Loop Gate Automation - Commercial Kit with Radar

Ideal for demanding environments, the e-Loop in-ground features all the functionality of the commercial with the added advantage of a in-ground installation. Perfect for low clearance vehicles, forklifts, tracked vehicles and heavy equipment.

Compatible with all Merlin and Grifco gate openers.

1. Performance & Suitability - Perfect for residential & light commercial use with limited daily cycles. Under typical conditions (e.g. 6 hours of sunlight per day on the Australian East Coast), you can expect around 20 cycles per day with one set of 772ANZ Safety Beams Connected. Actual performance depends on sunlight availability, gate condition, connected accessories and environmental factors. Refer to the manual for detailed performance calculations & suitability to your location.
2. Installation Tips & Site Selection - To get the best performance from your Solar Kit, consider panel placement. Install the solar panel where it gets full sunlight—ideally facing due North. Avoid shaded or obstructed areas, as this will reduce charging efficiency. It is important to keep the solar panel close to the power supply enclosure, and ensure the enclosure is within reach of your gate opener.
3. Choosing the Right Setup - Solar performance depends on your location, sunlight hours, and how often the gate is used. Some setups may need two solar panels for reliable operation—especially in areas with less sun or higher usage. During long periods of low sunlight, you may need to recharge the system using the AC charging adaptor (included).

• IP65 Weather Resistant Power Supply Enclosure/Control Unit and Solar Panel
• 2 x 18Ah batteries
• 40W Solar Panel (a second 40W Solar Panel can be added for areas with low sunlight exposure*)
• Adjustable Solar Panel Mounting Kit
• 240V Mains Power Pack included to fully charge the SOLAR-KIT before installation

* If a second 40W Solar Panel is added, the Dual Solar Panel Cable Connector with 4m cable (041A0573) is required.  The Solar Panel Mounting Kit (SP-MOUNT-KIT) is also recommended.  

Built for Local Conditions
Designed in Australia to withstand the unique environmental demands of both Australian and New Zealand climates.
Weather Resistant & Durable
Features an IP65-rated Power Supply Enclosure, offering strong protection against dust, rain, and harsh weather.
Reliable Power Storage
Includes 2 x 18Ah high-capacity batteries to keep your gate opener running smoothly.
Solar Powered Convenience
Comes with a 40W Solar Panel for clean, efficient energy—no mains power required.
Expandable System
Need more power? Add a second 40W Solar Panel for improved performance in low-sunlight areas.*
Flexible Mounting Options
Includes a sturdy, adjustable mounting kit to position the solar panel for maximum sunlight exposure.
Pre-Installation Charging
A 240V Mains Power Pack is included to fully charge the system before setup.
3-Year Warranty*
Merlin Peace of Mind

*The warranty period for the Solar Kit Batteries is 12 months from the date of purchase.

Wall mount remote control holder

B 00 R04 Wall mount

LAMPY24-LED 24Vdc LED Flashing light with built in antenna

Flashing white light, 20÷255 Vac/dc with integrated antenna | Equipped with a flashing function as a standard feature, but can also be installed in systems that already have this function (useful for maintenance of older systems) | Reduced energy use thanks to one of the lowest absorbed power figures on the market (1 W) | Option of wall-mounting thanks to a bracket included in the package | Fast and easy to install, IRI.LAMP can also be set up as a fixed light

Internal Transformer for Low Voltage D5 Smart Evo & D3 Smart

Grifco/Merlin Receiver STAR1000

The Tomalok gate lock boasts a sleek and sophisticated aesthetic with its all-black powder-coated stainless steel construction. This unit not only exudes a modern and stylish appearance but also offers durability and resistance to the elements, making it a reliable and visually appealing choice for securing your gate. The seamless integration of the black powder coating adds a touch of elegance, while the robust stainless steel material ensures longevity and strength, embodying both form and function in a single, cohesive design.