1. Shop
  2. DIY Sliding Gate Kit
  3. Sliding Gate Hardware
Sort By: Newest Arrivals
Sliding Gate Hardware

Sliding Gate Hardware

Sliding Gate Hardware
Sliding Gate Hardware
Telescopic Sliding Gate component
Telescopic Sliding Gate component
Sliding Gate Hardware
Sliding Gate Hardware
Telescopic Sliding Gate component
Telescopic Sliding Gate component
SBHD365
Steel Sliding block holder 300x82x28mm - Steel Zinc finished

Steel Sliding block holder  300x82x40mm - Steel Zinc finished

$ 13.27 13.27 AUD
WBK002W
White Sliding Nylon Block + White Steel Holder Kit
$ 63.51 63.51 AUD
WH410
Sliding gate wheel V groove No bracket 100mm double bearing

Sliding gate wheel V groove No bracket double bearing

$ 47.27 47.27 AUD
SBHD378
Steel Sliding block holder with Top Cap 280x80x27mm with Cap- Steel Zinc finished

Steel Sliding block holder with Top Cap for Picket or uneven ground Gates Dimensions :280x80x26mm - Steel Zinc finished for 75mm Block 

$ 15.09 15.09 AUD
SBHD375
Steel Sliding block holder 300x82x40mm - Steel Zinc finished

Steel Sliding block holder  300x82x40mm - Steel Zinc finished

$ 13.27 13.27 AUD
SGSB427B
Steel Sliding Block Holder - 100mm, Black, Small Profile
$ 17.73 17.73 AUD
WH396
Steel Sliding Gate 360 Turn Wheel U Groove 80mm External double bearing

Steel Sliding Gate 360 Turn Wheel U Groove 80mm External double bearing

Heavy Duty  Steel Sliding gate component wheel or rollers U groove 80mm Dia - Double bearing

Double Bearing support Max capacity weight 250 kg per wheel

Material :  Steel Wheel - Zinc plated

$ 25.91 25.91 AUD
BK260
Solid steel joiner 125mmx16mm for Sliding Floor Track - Zinc plated


$ 4.50 4.5 AUD
WH482
Sliding Gate Wheel V Groove 90mm Internal Double bearing

The WH482 Sliding Gate Wheel is a high-quality, Italian-made wheel designed for smooth and reliable operation of sliding gates. With a V-groove design and a diameter of 90mm, this wheel ensures proper gate alignment and reduces friction during movement. The double bearing construction further enhances the wheel's performance and durability. Whether for residential or commercial applications, the WH482 Sliding Gate Wheel provides exceptional functionality and long-lasting performance.

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Cutting machine
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

  • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
  • The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 22.73 22.73 AUD
WH354
Sliding Gate Wheel U Groove 80mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 80mm 2 wheels with bracket Double bearing

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 68.18 68.18 AUD
WH350
Sliding Gate Wheel U Groove 60mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 60mm 2 wheels with bracket Double bearing

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 44.55 44.550000000000004 AUD
WH356
Sliding Gate Wheel U Groove 100mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 100mm 2 wheels with bracket Double bearing



$ 71.36 71.36 AUD
SGSB410B
Steel Sliding Block Holder - 65mm, Black


$ 12.27 12.27 AUD
WH245
Sliding Gate Guide Roller Set - 165x110mm Silver Bracket, 40x60mm Black Rollers

The Guide Bracket with 2 Rollers is a versatile accessory designed to facilitate smooth and controlled movement for sliding gates. With a dimension of 165x115mm, this guide bracket features two rollers measuring 40x60mm each. It is constructed with high-quality materials to ensure durability and longevity. The guide bracket provides stability and support for sliding gates, allowing them to glide effortlessly along the track. It is suitable for various gate applications and offers reliable performance.

$ 35.45 35.45 AUD