Accessories and Tools
Accessories and Tools
Base Plates
Base Plates
Cantilever Gate System
Cantilever Gate System
DIY Sliding Gate Kit
DIY Sliding Gate Kit
End Caps
End Caps
Fence Panels
Fence Panels
Fencing Brackets
Fencing Brackets
Fencing Spears
Fencing Spears
Floor Tracks
Floor Tracks
Gate Closers
Gate Closers
Gate Hinges
Gate Hinges
Gate Holders
Gate Holders
Gate Locks and Latches
Gate Locks and Latches
Gate Stops
Gate Stops
Gate Wheels
Gate Wheels
Gatemaster
Gatemaster
Letter Boxes
Letter Boxes
Locinox
Locinox
Motor Accessories
Motor Accessories
Post Bases
Post Bases
Rollers and Brackets
Rollers and Brackets
Sliding Gate Motors
Sliding Gate Motors
Swing Gate Motors
Swing Gate Motors
Tube Connectors
Tube Connectors
Touch Up Paints
Touch Up Paints
Wrought Iron
Wrought Iron
Garage Door Motors
Garage Door Motors
TigerTech
TigerTech
Overhead Sliding Gate System
Overhead Sliding Gate System
Round Pipe Fitting
Round Pipe Fitting
Fence Posts
Fence Posts
SGSB414
Steel Sliding Block Holder - 75mm, Rubber Stop

The SGSB414 Sliding Gate Holder is specifically designed for 75mm gates, providing a reliable and secure solution for holding and guiding sliding gates. It features a rubber component that ensures smooth and quiet operation, reducing friction and wear on the gate. The sliding gate holder is easy to install and offers durability for long-term use. With its sturdy construction and functional design, the SGSB414 Sliding Gate Holder is an essential component for your sliding gate system.

$ 14.09 14.09 AUD
SGSB429
Steel Sliding Block Holder - 40mm, Top Cap

The SGSB429 Sliding Gate Holder is designed for 40mm gates, offering a reliable and convenient solution for sliding gate systems. With a welded cap, this gate holder provides added durability and strength. The holder ensures smooth operation and precise alignment, allowing for easy opening and closing of your gate. Upgrade your gate system with the SGSB429 Sliding Gate Holder to enhance functionality and ensure secure gate operation.

$ 17.73 17.73 AUD
SGSB398
Steel Sliding Block Holder - 40mm, Mounting Bracket

The SGSB398 Sliding Gate Holder is designed to provide secure and reliable support for sliding gates. It features a 40mm holder with a mounting bracket for easy installation. The sliding gate holder is made from durable materials to withstand outdoor conditions and ensure long-lasting performance. With its sturdy construction and practical design, the SGSB398 Sliding Gate Holder offers a dependable solution for your sliding gate system.

$ 17.73 17.73 AUD
SGSB399
Steel SlidinSteel Sliding Block Holder - 40mm, Top Cap, Rubber Stopg Block Holder - 40mm

The SGSB399 Sliding Gate Holder is designed to provide secure and convenient support for sliding gates. It features a 40mm holder with a welded cap and rubber stop, ensuring smooth and controlled gate movement. The sliding gate holder is made from durable materials to withstand outdoor conditions and offers reliable performance. With its practical design and added features, the SGSB399 Sliding Gate Holder is an excellent choice for your sliding gate system.

$ 22.27 22.27 AUD
SGSB439
Steel Sliding Block Holder - 100mm, Top Cap

The SGSB439 Sliding Gate Holder is specifically designed for 100mm gates, offering reliable and smooth operation for sliding gate systems. Featuring a welded cap, this gate holder provides added strength and durability, ensuring long-lasting performance. It is made from high-quality materials to withstand outdoor conditions and offers easy installation for convenient gate maintenance. Upgrade your sliding gate system with the SGSB439 Sliding Gate Holder for enhanced functionality and improved gate control.

$ 25.45 25.45 AUD
SGSB438
Steel Sliding Block Holder - 100mm, Rubber Stop

The SGSB438 Sliding Gate Holder is designed for 100mm gates, providing reliable and smooth operation for sliding gate systems. With its rubber stopper, this gate holder ensures gentle and quiet gate movement, minimizing noise and vibrations. It is made from durable materials to withstand outdoor conditions and offers easy installation for convenient gate maintenance. Upgrade your sliding gate system with the SGSB438 Sliding Gate Holder for enhanced performance and a more enjoyable user experience.

$ 18.18 18.18 AUD
WH384
Sliding Gate External Wheel/Rollers for U Groove White Nylon 90mm Stainless Steel Bracket

The WH384 Sliding Gate External Wheel Rollers are designed to provide smooth and reliable operation for your sliding gate. These rollers feature a white nylon wheel with a 90mm diameter, which reduces friction and ensures quiet movement. The wheel rollers are mounted on a sturdy stainless steel bracket, offering durability and resistance to corrosion. With their U-groove design, these rollers are suitable for various types of sliding gates. Whether it's for residential or commercial applications, these external wheel rollers deliver excellent performance and ease of use.

Hold weight up to 100kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 29.27 29.27 AUD
BK100
Sliding Gate End Stopper Multi fit for Overhead Sliding Gate

The SGHR400 Sliding Gate End Stopper is a versatile solution designed for overhead sliding gates. It provides a secure stop point for the gate when fully opened, preventing it from going off track or causing any damage. With its multi-fit design, this end stopper is compatible with various sliding gate systems, offering flexibility in installation. Made with durable materials, it ensures long-lasting performance and reliable gate operation.

$ 18.00 18.0 AUD
WH555
Sliding Block for Sliding Gate Nylon Guide size 75mm Black

The WH555 Sliding Block for Sliding Gate is a high-quality nylon guide designed to enhance the performance of your sliding gate system. With a size of 75mm, this sliding block provides smooth and reliable gate movement while reducing friction. The black color adds a sleek and modern touch to your gate design. Upgrade your sliding gate with the WH555 Sliding Block for improved functionality and a stylish appearance.

$ 15.32 15.32 AUD
WH556
Sliding Block for Sliding Gate Nylon Guide size 75mm White

The WH556 Sliding Block for Sliding Gate is a high-quality nylon guide designed to enhance the performance of your sliding gate system. With a size of 75mm, this sliding block provides smooth and reliable gate movement while reducing friction. The white color complements various gate designs and adds an elegant touch to your property. Upgrade your sliding gate with the WH556 Sliding Block for improved functionality and a visually appealing appearance.

$ 15.42 15.42 AUD
FK125
Slide Padbolt 175mm / 60mm Long Shoot

Upgrade the security of your gates with the FK125 Slide Pad Bolt available at TigerLink. This 190mm bolt offers a secure locking mechanism for your gates, providing peace of mind and enhanced protection. Our reliable gate hardware is designed to withstand various weather conditions and ensure long-lasting performance. Shop now and fortify your gates with the FK125 Slide Pad Bolt from TigerLink.

$ 4.41 4.41 AUD
FK120
Slide Padbolt 140mm / 30mm Long Shoot

Description

The Slide Pad Bolt is a robust and secure locking solution designed for gates, doors, cabinets, and other applications. It features a 140mm long shoot, providing extended reach and secure locking. The slide pad bolt is made from durable materials, ensuring long-lasting performance and resistance to corrosion. It offers reliable and convenient operation, allowing you to easily secure your enclosures. The Slide Pad Bolt is suitable for both indoor and outdoor use, making it a versatile choice for various locking needs. With its easy installation and dependable locking mechanism, the Slide Pad Bolt is an ideal solution for ensuring the security of your gates, doors, and cabinets.

$ 6.82 6.82 AUD
FK115
Slide Padbolt 100mm / 30mm Long Shoot

The Slide Pad Bolt is a versatile locking solution designed for various applications, including gates, doors, and cabinets. It features a 100mm long shoot and a 30mm long slide pad, providing secure locking and easy operation. The slide pad bolt is made from durable materials to ensure long-lasting performance and resistance to corrosion. It is suitable for both indoor and outdoor use, making it a versatile choice for securing different types of enclosures. The Slide Pad Bolt is easy to install and can be operated with a simple sliding action. Whether you need to secure your gate, door, or cabinet, the Slide Pad Bolt offers a reliable and convenient locking solution.

$ 2.23 2.23 AUD
ET486
Single push button with key - Hardwire

Wired Single Push Button Switch with Key Issolation

Low Voltage Single Push Button Switch with isolation key switch for operating automatic gates or garage opening systems. This switch can be wired to operate any device requiring momentary switching

$ 45.00 45.0 AUD
MT280
Twist Basket Single Bar for Wrought Iron Gate 16x16mm 1000m- Zinc Plated

Single Twist Basket Bar for wrought iron gate 16x16mm H 1000mm long

We offers a range of Wrought iron gates and fencing products from Iron scrolls and lacework products from forged locally and imported from,

Rings, Stamped decorative components, spearheads, twist bars and more.

Our Wrought iron scrolls and rings are modern design for your elegant fence and gate.

Please contact us for Bulk price & availability

scrolls on top of the gate

S Scroll inserted into a gate

$ 13.18 13.18 AUD
MT284
Twist Bar Single for wrought iron gate 16x16mm H 1000mm long - Zinc Plated

Single Twist  Bar for wrought iron gate 16x16mm H 1000mm long

We offers a range of Wrought iron gates and fencing products from Iron scrolls and lacework products from forged locally and imported from,

Rings, Stamped decorative components, spearheads, twist bars and more.

Our Wrought iron scrolls and rings are modern design for your elegant fence and gate.

Please contact us for Bulk price & availability

scrolls on top of the gate

S Scroll inserted into a gate

$ 10.45 10.450000000000001 AUD
HN900
Single Self Closing Hinge - Stainless Steel - 316 Marine Grade

The Single Self-Closing Hinge is a high-quality hinge specifically designed for gates, made from durable stainless steel 316 marine-grade material. This ensures excellent corrosion resistance and long-lasting performance, even in harsh outdoor environments. The hinge features a self-closing mechanism, allowing the gate to close automatically once it's opened, providing convenience and enhanced security. With its sleek and sturdy design, the hinge offers reliable functionality and a professional look. It is suitable for a wide range of gate applications, including residential and commercial settings.


$ 153.64 153.64000000000001 AUD
MT204
Single Scroll 230x90x12x6mm - Zinc Plated

The content of this cell is too long for an XLSX file (more than 32767 characters). Please use the CSV format for this export.

$ 4.18 4.18 AUD
MT201
Single Scroll 200x80x40x12x6mm- - Zinc Plated

Single S Scroll 200x80x40x12x6mm- Zinc

$ 4.41 4.41 AUD
ET488
Single Push Button Letron with Key - Wireless

This wireless single push button with key by Letron is perfect for easy and secure gate access control. Its wireless capabilities make it easy to install, and the key feature adds an extra level of security.


Compatible with any motor with the help of an additional universal receiver.

$ 86.36 86.36 AUD