Sort By: Newest Arrivals
Accessories and Tools
Accessories and Tools
Base Plates
Base Plates
Cantilever Gate System
Cantilever Gate System
DIY Sliding Gate Kit
DIY Sliding Gate Kit
End Caps
End Caps
Fence Panels
Fence Panels
Fencing Brackets
Fencing Brackets
Fencing Spears
Fencing Spears
Floor Tracks
Floor Tracks
Gate Closers
Gate Closers
Gate Hinges
Gate Hinges
Gate Holders
Gate Holders
Gate Locks and Latches
Gate Locks and Latches
Gate Stops
Gate Stops
Gate Wheels
Gate Wheels
Gatemaster
Gatemaster
Letter Boxes
Letter Boxes
Locinox
Locinox
Motor Accessories
Motor Accessories
Post Bases
Post Bases
Rollers and Brackets
Rollers and Brackets
Sliding Gate Motors
Sliding Gate Motors
Swing Gate Motors
Swing Gate Motors
Tube Connectors
Tube Connectors
Touch Up Paints
Touch Up Paints
Wrought Iron
Wrought Iron
Garage Door Motors
Garage Door Motors
TigerTech
TigerTech
Overhead Sliding Gate System
Overhead Sliding Gate System
Round Pipe Fitting
Round Pipe Fitting
WH482
Sliding Gate Wheel V Groove 90mm Internal Double bearing

The WH482 Sliding Gate Wheel is a high-quality, Italian-made wheel designed for smooth and reliable operation of sliding gates. With a V-groove design and a diameter of 90mm, this wheel ensures proper gate alignment and reduces friction during movement. The double bearing construction further enhances the wheel's performance and durability. Whether for residential or commercial applications, the WH482 Sliding Gate Wheel provides exceptional functionality and long-lasting performance.

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Cutting machine
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

  • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
  • The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 22.73 22.73 AUD
WH483
Sliding Gate Wheel V Groove 120 mm diametre

Sliding Gate Wheel V Groove 120 mm dia

482 kgs Carry capacity - Double bearings 

$ 39.82 39.82 AUD
WH402
Sliding Gate Wheel U Groove 80mm Dia double bearing no Bracket

The WH402 Sliding Gate Wheel with U-Groove is designed to provide smooth and reliable operation for your sliding gate system. With its 80mm diameter and U-groove design, this wheel offers excellent traction and stability. The double-bearing system ensures smooth movement and reduces friction, allowing for effortless gate opening and closing. This wheel does not include a bracket, providing flexibility for mounting options. Upgrade your sliding gate system with the WH402 Sliding Gate Wheel for enhanced performance and durability.


Hold weight up to 300kg

$ 16.82 16.82 AUD
WH354
Sliding Gate Wheel U Groove 80mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 80mm 2 wheels with bracket Double bearing

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 68.18 68.18 AUD
WH350
Sliding Gate Wheel U Groove 60mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 60mm 2 wheels with bracket Double bearing

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 44.55 44.550000000000004 AUD
WH406
Sliding Gate Wheel U Groove 120mm Dia double bearing

Sliding Gate Wheel U Groove 120mm Dia double bearing
Fits 20mm round groove track.
- Zinc plated, Double Bearings.
- Load Capacity = 482kg/wheel.

- 20mm Hole Size

 

$ 19.55 19.55 AUD
WH356
Sliding Gate Wheel U Groove 100mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 100mm 2 wheels with bracket Double bearing



$ 71.36 71.36 AUD
FS742
Sliding Gate Track Fasteners Zipfix 40mm x 6mm - Each

The Sliding Gate Track Fasteners Zipfix are designed for use with sliding gates. These fasteners are made of durable materials and are built to withstand heavy use. They measure 40mm x 6mm and are sold individually.

$ 1.09 1.09 AUD
WH110
Sliding Gate Guide Roller - 25x40mm, M12 Bolt, Black

The Wh110 Sliding Gate Top Guide Roller is a heavy-duty accessory designed for sliding gates. With a size of 25x40mm, this top guide roller provides smooth and reliable guidance for your gate. It is made of durable nylon material, ensuring long-lasting performance. The Wh110 Guide Roller is designed for easy installation and is suitable for heavy gates. The black color adds a sleek and modern touch to your gate. Upgrade your sliding gate with this heavy-duty top guide roller for smooth and effortless operation.

$ 6.18 6.18 AUD
WH287
Sliding Gate Guide Roller Set - 210x225mm Silver Bracket, 40x60mm Black Rollers

The WH287 Sliding Gate Top Guide Holder with 2 Rollers is a reliable and efficient solution for your sliding gate system. This guide holder offers stable support and smooth gate operation. It comes with two rollers measuring 40x60-110mm, ensuring optimal gate movement and reduced friction. The durable construction and high-quality materials make it suitable for outdoor use. Upgrade your sliding gate with the WH287 Top Guide Holder for improved performance and convenience.

$ 38.18 38.18 AUD
WH255
Sliding Gate Guide Roller Set - 200x160mm Silver Bracket, 40x100mm Black Rollers

The WH255 Sliding Gate Top Guide Holder with 2 Rollers is a versatile and reliable accessory for your sliding gate system. With a size of 200x162mm, this guide holder provides stable support and smooth operation. It comes with two rollers measuring 40x100mm, ensuring effortless gate movement and reducing friction. The durable construction and high-quality materials make it suitable for outdoor use. Upgrade your sliding gate with the WH255 Top Guide Holder for improved performance and reliability.

$ 35.27 35.27 AUD
WH288
Sliding Gate Guide Roller Set - 210x225mm Black Bracket, 40x60mm Black Rollers

The WH288 Sliding Gate Top Guide Holder with 2 Rollers is a high-quality solution for your sliding gate system. With a size of 212x225mm and a maximum gate width of 75mm, this guide holder offers reliable support and smooth gate operation. It comes with two rollers measuring 40x60mm, ensuring optimal gate movement and reduced friction. The black finish adds a sleek and modern touch to your gate design. Upgrade your sliding gate with the WH288 Top Guide Holder for enhanced functionality and style.

$ 40.00 40.0 AUD
WH112
Sliding Gate Guide Roller - 25x40mm, M12 Bolt, White

The Wh312 Sliding Gate Post Top Guide Roller is an essential accessory for sliding gates. With a size of 25x40mm, this guide roller ensures smooth and reliable operation for your gate. It is made of high-quality materials for durability and longevity. The Wh312 Guide Roller is designed to be installed on gate posts, providing effective guidance and support. The white color adds a clean and stylish touch to your gate. Upgrade your sliding gate with this top guide roller for enhanced functionality and ease of use.

$ 6.18 6.18 AUD
MK440
Handleless Oval Insert Mortice Lock - Complete Kit - 40x40 Frame, 20mm Backset, Silver - For Sliding Gates

The Sliding Gate Lock is a high-quality locking solution designed specifically for sliding gates. This lock from Yale offers superior security and functionality, ensuring the reliable protection of your sliding gate. With its robust construction and advanced engineering, the provides enhanced resistance against forced entry and unauthorized access. The Yale Sliding Gate Lock features a user-friendly design, allowing for easy installation and operation. Whether for residential or commercial applications, the Yale Sliding Gate Lock is a trusted choice for securing sliding gates with peace of mind.

$ 153.64 153.64000000000001 AUD
FK842
Locinox Sliding Gate Lock U2L - For 40mm Round Post - SILVER

Description

Industrial lock for manual sliding gates with aluminium housing and stainless steel mechanism. The unique Twistfinger and according auto-correcting keep guarantees a perfect aligned closing of your sliding gate.


Specifications

  • ISO 9227 KTL / E-coated lock box withstands 1000 hours of salt spray test
  • Easy left or right changing of the self-latching daybolt
  • 23 mm throw of the dead bolt, in 1 turn of the key
  • Key-operated self-latching bolt
  • 4-hole fixing with two hexagon socket head screws
  • 60 mm center distance of the bolts
  • Continuous adjustment of the daybolt up to 20 mm without dismounting the lock box
  • Stainless steel mechanism
$ 245.68 245.68 AUD
SGSB412
Steel Sliding Block Holder - 65mm, Rubber Stop

The SGSB412 Sliding Gate Holder Bracket is designed for 65mm gates and provides a reliable solution for holding and guiding sliding gates. It features a rubber stop for smooth and quiet operation, reducing noise and impact during gate movement. The sliding gate holder bracket is made with durable materials for long-lasting performance. With its easy installation and effective functionality, the SGSB412 Sliding Gate Holder Bracket ensures optimal performance of your sliding gate system.

$ 13.27 13.27 AUD
SGSB423
Steel Sliding Block Holder - 90mm, Top Cap

The SGSB423 Sliding Gate Holder is designed for 90mm gates, offering reliable support and precise alignment. With a welded cap for added strength and durability, this sliding gate holder ensures secure closure and smooth operation of your sliding gate. The zinc-plated finish provides corrosion resistance, making it suitable for outdoor applications. Upgrade your gate system with the SGSB423 Sliding Gate Holder for optimal performance and long-lasting functionality.

$ 25.45 25.45 AUD
SGSB421
Steel Sliding Block Holder - 75mm, Top Cap

The SGSB421 Sliding Gate Holder is designed for 75mm gates and features a sturdy welded cap for added strength and durability. This sliding gate holder provides reliable support and precise alignment for sliding gates, ensuring smooth operation and secure closure. With its robust construction and welded cap design, it offers enhanced stability and longevity. Upgrade your sliding gate system with the SGSB421 Sliding Gate Holder for optimal performance and peace of mind.

$ 16.82 16.82 AUD
SGSB429
Steel Sliding Block Holder - 40mm, Top Cap

The SGSB429 Sliding Gate Holder is designed for 40mm gates, offering a reliable and convenient solution for sliding gate systems. With a welded cap, this gate holder provides added durability and strength. The holder ensures smooth operation and precise alignment, allowing for easy opening and closing of your gate. Upgrade your gate system with the SGSB429 Sliding Gate Holder to enhance functionality and ensure secure gate operation.

$ 17.73 17.73 AUD
FK125
Slide Padbolt 175mm / 60mm Long Shoot

Upgrade the security of your gates with the FK125 Slide Pad Bolt available at TigerLink. This 190mm bolt offers a secure locking mechanism for your gates, providing peace of mind and enhanced protection. Our reliable gate hardware is designed to withstand various weather conditions and ensure long-lasting performance. Shop now and fortify your gates with the FK125 Slide Pad Bolt from TigerLink.

$ 4.41 4.41 AUD