Kit Includes:
Beninca 424SW x 1
Beninca Low Voltage Box and adapter x 1
Beninca Remotes x 3
Lugs down nylon racks x 4
The BULL424SW is a 24 volt motor designed for residential and commercial sliding gates up to 450kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 450KG The BULL424SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL424SW is designed for residential and commercial sliding automatic gates up to 450kg in weight. The BULL424SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.
Motor Voltage - 24 volts DC
Current Standby - 8mA
Current at use - 3.2A
Motor power - 80W
Maximum thrust - 428N
Operating speed - 11 metres per minute (adjustable)
Maximum gate size - 450 kg
Duty cycle - 80%
Height - 330mm Width - 326mm Depth - 140mm
Weight - 7.6 Kg
IP rating - IP44
24 volts DC
8mA
0.4A
80W
428N
11 Metres per minute
400 Kg
IP44
330mm
140mm
326mm
10.2 Kg
80%
Battery Back upWireless Keypad
TIGER Universal Wireless Keypad Waterproof for any Gate Motors and Garage Door Openers with Universal Receiver 2 Channels
Our Tiger Universal Wireless Keypad for any Gates and Garage Door Openers or Slide gate system.
Two Channel Wireless Keypad
Touch Sensor Buttons
Tempered Glass
Compatible with most of fixed code & rolling code
Power: 6V DC (4*AA batteries)
Two indicator & back-light
Up to 20 M operating distance
Security lockout
Anti tamper alarm
Pin code scramble
Ultra low consumption 18uA standby / 6mA active/ 28mA working
Multi user(CH1 = 8 pin codes)(CH2 = 3 pin codes)
IP Rating 53
Dimension : 88mm (W) x122mm (H) x80mm (D)
The Safety DC Power 24V 60W is a reliable power supply specifically designed for motorized electrical drop bolts. This safety power unit ensures a stable and consistent power output of 24V, providing the necessary energy to operate the drop bolt effectively. With a power rating of 60W, it delivers sufficient power to ensure smooth and reliable operation of the motorized drop bolt, enhancing the overall security of your gate system. The Safety DC Power is built with safety features, including overload and short circuit protection, to prevent any electrical damage or accidents. Upgrade your motorized drop bolt system with the Safety DC Power for reliable and secure gate operation.
7Amp low voltage box with built-in transformer.
Up to 45m distance
Works with all Beninca Control Boards with screen.
For SW series (without screen), please contact us for an adapter free of charge.
Irreversible 24V DC Gear Motor for Intensive Use
✔ Available With or Without a Control Unit – Choose the option that best suits your setup.
✔ Easy Installation & Maintenance – The control unit is positioned on a removable support for quick access to mechanical stops and simplified installation.
✔ Efficient & Long-Lasting – 100-250V AC switching power supply reduces energy consumption and extends the actuator’s lifespan.
✔ Designed for Large Swing Gates – Suitable for gates with large columns and leaf hinges up to 280mm deep (only 170mm wide).
✔ Maximum Safety & Precision – The encoder system ensures accurate gate movement and obstacle detection with an amperometric sensor to prevent crushing.
✔ Smart Torque Control (STC System) – Manages torque based on gate position for optimal performance and safety.
✔ Strong & Secure Arm Design – Includes a closing lock that helps define the limit switch position during installation.
✔ Reliable in Power Outages – Compatible with backup batteries that seamlessly integrate into the motor for uninterrupted operation.
✔ Weather-Resistant Cable Management – Motor fixing bracket with a cable gland ensures a secure and tidy cable setup.
✔ KNX Home Automation Ready – Can be connected to the X.BE module for seamless integration into smart home systems, programmable via the BeUP app and PRO.UP interface.
✔ External Manual Release Option – The adjustable flush release allows gate opening from the outside in case of a power failure.
This aluminium end cap is designed to fit square tubes with a size of 20x20mm and a 1.5mm wall thickness. The end cap is made of high-quality aluminum, providing durability and protection to the ends of your tube. It is easy to install and gives your project a professional and neat finish.
This aluminium end cap is designed to fit square tubes with a size of 25x25mm and a 1.5mm wall thickness. The end cap is made of high-quality aluminum, providing durability and protection to the ends of your tube. It is easy to install and gives your project a professional and neat finish.
Features:
Product Manual
Intercom
> 2.4G WiFi connection> Android and iOS available> Full duplex voice intercom> 2MP+wide angle camera and night vision> Support TF card with unlimited capacity> Support motion detection, playback, take picture/video, unlock remotely
Access Control
> Touch key with one relay, 1000 users (988 common+2 panic+10 visitor)> PIN Length: 4~6 digits> EM card, Mifare card optional> Wiegand 26~44 bits in put & output> Can be used as Wiegand reader with LED & buzzer> User data can be transferred> 2 devices can be interlocked for 2 doors
Dry Contact Wireless Push/Exit Button
It is a 433MHz wireless exit button, with 1 million groups of rolling code encryption, secure and reliable.
Dry contact control - with isolation circuit, control current ≤5A, can connect with household electrical appliances or lock to control directly.ÍÍ
> 433MHz Rolling Code Technology
> Easy installation by 3M stickers
> 2032 lithium battery operated
> Dimension: 4.0W x 8.3L x 1.5D (cm)
> Control current < 5A
Overhead Sliding Gate/Hanging Barn Door 2 Nylon Wheel for Gate up to 120kg
This aluminium end cap is designed to fit square tubes with a size of 100x50mm and a 2mm wall thickness. It provides a clean and professional finish to the ends of your tube, while also offering protection against damage. The end cap is made of high-quality aluminium, ensuring durability and resistance to corrosion. It is easy to install and adds a sleek touch to your project.
This aluminium end cap is designed to fit square tubes with a size of 50x50mm and a 2mm wall thickness. The end cap is made of high-quality aluminum, providing durability and protection to the ends of your tube. It is easy to install and gives your project a professional and neat finish.
This aluminium end cap is designed to fit square tubes with a size of 40x40mm and a 2mm wall thickness. The end cap is made of high-quality aluminum, providing durability and protection to the ends of your tube. It is easy to install and gives your project a professional and neat finish.
With the G-ULTRA, your entire world fits into the palm of your hand, giving you complete control at your fingertips. This is the evolution of GSM technology, designed to offer you the ultimate flexible, mobile-based access control and monitoring solution and allowing you to transcend archaic notions of what GSM can achieve.
Main features:
Devices that can be monitored via the inputs
Devices that can be controlled via the outputs
Stainless Steel 304 Swing / Sliding Gates Pull Handle
Galvanised Gate Hinges 40NB x 25NB (48mmx34mm)
Swing Gate Stainless steel PULL and Push PLATE with Handle
LOCKTON PPP-SET-SS - Contains one of each Stainless Steel "Push" Plate & "Pull" Plate.
Fixing holes on each plate allows handles to be mounted either back to back or at different heights if needed.
Supplied in a box with fixing screws. Often also used to cover existing holes & or damage to doors.
PRODUCT SPECIFICATION