Sort By: Newest Arrivals
Accessories and Tools
Accessories and Tools
Base Plates
Base Plates
Cantilever Gate System
Cantilever Gate System
DIY Sliding Gate Kit
DIY Sliding Gate Kit
End Caps
End Caps
Fence Panels
Fence Panels
Fencing Brackets
Fencing Brackets
Fencing Spears
Fencing Spears
Floor Tracks
Floor Tracks
Gate Closers
Gate Closers
Gate Hinges
Gate Hinges
Gate Holders
Gate Holders
Gate Locks and Latches
Gate Locks and Latches
Gate Stops
Gate Stops
Gate Wheels
Gate Wheels
Gatemaster
Gatemaster
Locinox
Locinox
Motor Accessories
Motor Accessories
Post Bases
Post Bases
Rollers and Brackets
Rollers and Brackets
Sliding Gate Motors
Sliding Gate Motors
Swing Gate Motors
Swing Gate Motors
Tube Connectors
Tube Connectors
Touch Up Paints
Touch Up Paints
Wrought Iron
Wrought Iron
TigerTech
TigerTech
Overhead Sliding Gate System
Overhead Sliding Gate System
Round Pipe Fitting
Round Pipe Fitting
GM334
Beninca - TRUST24 Control Board

APPLICATION

1 or 2 actuators for swing gates

CONTROL UNIT POWER SUPPLY

100 ÷ 250 Vac - 50/60 Hz

MOTORS POWER SUPPLY

24 Vdc / 130 W + 130 W

POWER CONSUMPTION IN STAND-BY

0.8 W

MAIN FUNCTIONS

Integrated LCD display | Integrated radio receiver 433.92 MHz 512 codes with ARC coding | Removable terminal boards | Separate limit switch inputs for each motor | Automatic, semi-automatic and Deadman logic | Separate encoder inputs for each motor | Open, close, step-by-step and pedestrian inputs | Input for programmable photocell active in opening-closing and photocell active only in closing | Input for N.C. or 8k2 sensitive edge | Output for electric lock 12/24 Vdc | Two outputs configurable as open gate signal light, courtesy light, zone light, second radio channel, photocell testing, flashing light, alarm contact | Autoset operating parameters | Separate electronic torque adjustment for each motor| Anti-crushing safety through amperometric detection and encoder management | Electronic torque adjustment with automatic calculation for each point of the stroke (STC SYSTEM) | Separate adjustable slowdowns for each motor | Possibility of encoder- or time-based operation (managed through virtual encoder) even independently between the two motors | Built-in energy saving system ESA+ | Set up for connection to KNX systems via X.BE card (optional) | Designed for managing, configuring, diagnosing and updating firmware through the BeUP app, using the PRO.UP accessory | Advantouch system to configure parameters and manage radio transmitters | Number of manoeuvres | Programming access password | Maintenance warning | Built-in battery charger


$ 495.45 495.45 AUD
MK541
Lockton Oval Insert Mortice Lock - Complete Kit - 50x50 Frame, 23mm Backset, Black - For Swing Gates

Lockton Stainless steel inflame Swing Gate Lock 23 MM  50mm Gate Frame - Kit


PRODUCT DESCRIPTION

The LOCKTON Art. SG-SBML23 Narrow Stile Mortice Lock (23mm Backset).

  • Retrofits most Australian 23mm Backset Latching Mortice Locks
  • Accepts Australian Oval Cylinders
  • Includes Fixing Screws, Strike Plate and Instructions
  • Easy Close Action for Electric Strikes
  • Uses Industry Standard Cams
  • Electric Strike Compatible 
PRODUCT SPECIFICATION
  • Latch: Stainless Steel (Reversible)
  • Mortice Lock (Body ONLY) is 38.5mm deep
  • A pair of Handle Matt Black
  • 2 x Oval Cylinders Matt Black


Optional available 

23mm Mortice Lock KIT2 (ENTRANCE) - Inc. Lock, Furniture & Cylinder   23mm Mortice Lock KIT1 (CLASSROOM) - Inc. Lock, Furniture & Cylinder *Matte Black*

$ 335.00 335.0 AUD
HN135
Stainless Steel 304 Flag Hinge Ball Bearing Lift Off Thickened Heavy Duty 130x100mm/Pair

Stainless Steel 360 Degree Flag Hinge Ball Bearing  Lift Off Thickened Heavy Duty  130x100mm

$ 17.73 17.73 AUD
GCHC103
Locinox VENUS Motorised Gate Closer with Articulated Arm for Pesdestrian Swing Gates - Silver

VENUS is a plug-and-play motorised gate closer for pedestrian swing gates. The compact all-in-one gate operator can easily be installed on any type of post and hinge thanks to 3 different arm types. The innovative motor’s performance remains unaffected by manual force. When combined with access control, the Venus also works as a low-energy gate opener.

The VENUS motorised gate closer is specifically designed for pedestrian gates up to 1400 mm and 100 kg.

VENUS is a brushless motor specially designed for semi-manual or fully automated outdoor use.


WHAT MAKES IT SPECIAL?

• Safe, reliable operation thanks to low-energy speed control and integrated obstacle detection.

• All-in-one gate operator with integrated power supply and circuit board, input/output connectors and indicator light.

• Easy setup with free mobile app



Specifications:

  • Motorised gate closer with integrated electronics
  • 150 Nm torque
  • Fits on 80 mm profiles
  • For pedestrian gates up to 1400 mm wide and 100 kg
  • Steel gear box
  • Anodized aluminium cover
  • 3 different arm options for installation
  • Easy mounting with Quick-Fix
  • Compact and vandal-proof design
  • Input main Power supply: 115V AC ±10% (60Hz) to 230V AC ±10% (50Hz), Max 5A
  • Motor voltage: 24V DC
  • Integrated warning light
  • Automated obstacle detection with reverse function
  • Brushless motor: long lifespan and intensive usage
  • Reversible motor with backdrivability for easy manual use – to be combined with a lock

PERFORMANCE

  • Specifically developed for outdoor use.
  • Weatherproof and dustproof.
  • IP55 rated.
  • Maintenance-free (no need to lubricate or add oil). Always verify if there are specific safety regulations by local authorities.
  • 2 year manufacturer’s warranty.
  • Tested on 500,000 movements.

INSTALLATION

  • For gate profiles of at least 80 mm, with a material thickness of at least 2 mm steel
  • Suitable for both left and right turning gates.
  • Requires a strike to determine the zero position.
  • No safety sensors required thanks to the standard low energy mode.
  • 3D installation video is available in an app.
  • 3 configurable inputs for connecting access control, security sensors, etc.
  • 3 configurable outputs for connecting an electric strike, electromagnetic strike plate, warning lamp or ambient lamp and a fixed 24V DC power supply.

CONFIGURATION

  • Programming via an app
  • Step-by-step guide with video instructions available within the app
  • App is available for ANDROID and IOS

MATERIAL

  • Anodised aluminium housing.
  • Corrosion resistance of 500 hours in salt spray test, according to ISO9227.
  • UV-resistant and colour-fast.

VIDEOS




DOCUMENTS


Installation Manual



$ 1,694.55 1694.55 AUD
SPNB304
Nylon Bush for light gate hinge 30x30mm

Nylon Bush for light gate hinge 25x25mm

$ 2.27 2.27 AUD
SPNB302
Nylon Bush for light gate hinge 25x25mm

Nylon Bush for light gate hinge 25x25mm

$ 2.27 2.27 AUD
GM332
Genuine Merlin Swing/Slide Gate Motor Control Board

Genuine Merlin Gate Swing/Slide Motor   Control Board 

This is a replacement gate control board which suits all of Merlin's current gate openers, both slide and swing models.

Important safety information is contained in the product installation and operation instruction manual. Please read the manual thoroughly before proceeding with any service work.

Please Note: All spare parts must be replaced by a qualified garage/gate service technician.


$ 440.91 440.91 AUD
HN133
Butt Hinges Stainless steel Fixed pin 100x75x2.5mm/ 2 hinges Black

The Butt Hinges are a set of two stainless steel hinges with a fixed pin design. Measuring 100x70x2.5mm, these hinges provide reliable support and smooth operation for doors, cabinets, and other applications. Made from high-quality stainless steel, they offer excellent durability and resistance to rust and corrosion. The fixed pin ensures stability and security, making them suitable for both residential and commercial use. Whether you're working on a renovation project or building new furniture, the Butt Hinges deliver reliable performance and long-lasting functionality.

$ 17.23 17.23 AUD
MK413
Euro Insert Mortice Lock - Complete Kit - 40x40 Frame, 20mm Backset, Silver - For Swing Gates

Stainless steel inflame Swing Gate Lock 20 MM BACKSET For 40x40mm Frame Kit


PRODUCT DESCRIPTION

This is a Kit that contains a 20mm Backset Mortice Lock, Euro Cylinder and Suitable 40x40mm gate frame.
Kit contains:

  • 1 x 20mm Narrow Stile Mortice Lock 
  • 1 pair stainless steel Lever handle
  • 1 x Euro double Cylinder with keys

PRODUCT SPECIFICATION

  • Retrofits most Australian 20mm Backset Latching Mortice Locks & Furniture
  • Accepts Australian Euro Cylinder
  • Stainless Steel reversible Latch
  • Easy close action for Electric Strikes
  • Uses industry standard Cams
  • Includes Turn-Snib Adaptor, Fixing Screws, Strike Plate & Instructions

 

$ 89.55 89.55 AUD
SZ534
Cast Aluminium Decorative Ring, 90x10mm

Aluminium Cast Decorative Ring 90x10mm

Feature product

  • Made of Aluminium
  • Size 90mm x 10mm
  • Decor your Gates and Fences to another level of beauty.


$ 2.68 2.68 AUD
HGRR222
Chain Fencing 2 Part Round Hinge - 25NB x 25 NB or 34x34mm / each

Galvanised Gate Hinges 25NB x 25NB (34mmx34mm)

$ 12.68 12.68 AUD
MOT380MVK
Mains Voltage Beninca Double Swing Gate Motor SAM.E24 Kit

Irreversible 24V DC Gear Motor for Intensive Use


✔ Available With or Without a Control Unit – Choose the option that best suits your setup.

✔ Easy Installation & Maintenance – The control unit is positioned on a removable support for quick access to mechanical stops and simplified installation.

✔ Efficient & Long-Lasting – 100-250V AC switching power supply reduces energy consumption and extends the actuator’s lifespan.

✔ Designed for Large Swing Gates – Suitable for gates with large columns and leaf hinges up to 280mm deep (only 170mm wide).

✔ Maximum Safety & Precision – The encoder system ensures accurate gate movement and obstacle detection with an amperometric sensor to prevent crushing.

✔ Smart Torque Control (STC System) – Manages torque based on gate position for optimal performance and safety.

✔ Strong & Secure Arm Design – Includes a closing lock that helps define the limit switch position during installation.

✔ Reliable in Power Outages – Compatible with backup batteries that seamlessly integrate into the motor for uninterrupted operation.

✔ Weather-Resistant Cable Management – Motor fixing bracket with a cable gland ensures a secure and tidy cable setup.

✔ KNX Home Automation Ready – Can be connected to the X.BE module for seamless integration into smart home systems, programmable via the BeUP app and PRO.UP interface.

✔ External Manual Release Option – The adjustable flush release allows gate opening from the outside in case of a power failure.




$ 1,280.91 1280.91 AUD
WH603
Nylon Overhead Sliding Gate Carriage, 2 Wheel - Type B, up to 120kg

Overhead Sliding Gate/Hanging Barn Door 2 Nylon Wheel for Gate up to 120kg

$ 35.91 35.910000000000004 AUD
ET138
Centsys G-Ultra 4G GSM

G-ULTRA – The ultimate GSM solution

With the G-ULTRA, your entire world fits into the palm of your hand, giving you complete control at your fingertips. This is the evolution of GSM technology, designed to offer you the ultimate flexible, mobile-based access control and monitoring solution and allowing you to transcend archaic notions of what GSM can achieve.

Unbridled. Unchained. Unmatched. Ultra.

Main features:

  • Monitor up to four electrical devices by receiving push notifications
  • Use the outputs to control up to six devices from your phone (two additional onboard relays)
  • Intelligent monitoring of CENTSYS gate motors’ status outputs (for example gate opening, gate left open, etc.)
  • Suitable for a wide variety of access automation applications
  • Time-barring and visitor control – ideal for B & Bs and guesthouses
  • LCD screen for easy access to diagnostics
  • Instant activation via G-REMOTE mobile app
  • Easy setup via G-WEB PLUS online interface

Devices that can be monitored via the inputs

  • House alarm: activated
  • Electric fence: alarm triggered
  • Geyser status: On/Off
  • Mains power: On/Off
  • Fridge aboard your boat: On/Off
  • Borehole pump status: Running/Off
  • Water reservoir: Full/Empty
  • Entrance gate status: Open/Pedestrian

 Devices that can be controlled via the outputs

  • Automated entrance gates
  • Geysers
  • Appliances, e.g. the fridge aboard your boat
  • Air conditioners
  • Borehole pumps
  • Lighting systems
  • Irrigation and water features
  • Alarm systems

 


$ 531.82 531.82 AUD
FK483
Locinox LAKY F2 Small Ornamental Lock F2 Square profile adjustable 30-40mm - Silver

Small Ornamental Lock F2 Flat profile adjustable 10-20mm

Locinox Ornamental lock with aluminium housing and stainless steel mechanism. We advise this lock as a standard for all your ornamental gates. The 10 mm continuous adjustability of the bolts allows a perfect alignment of your locking mechanism. A solid stainless steel deadbolt with a 23 mm throw guarantees a secure locking. Standard supplied with zamac ornamental handle pair.

 

  • ISO 9227 KTL / E-coated lockbox withstands 1000 hours of salt spray test
  • Easy left or right changing of the self-latching daybolt
  • Throw of the deadbolt, 23 mm in 1 turn of the key
  • Adjustment of the bolts up to 10 mm continuous without dismounting the lockbox
  • Key-operated self-latching bolt
  • 4-hole fixing with two hexagon socket head screws
  • Center distance bolts: 60 mm
$ 144.95 144.95000000000002 AUD
HGRR422
Chain Fencing 2 Part Round Hinge - 40NB x 25 NB or 48x34mm / each

Galvanised Gate Hinges 40NB x 25NB (48mmx34mm)

$ 10.86 10.86 AUD
MKLH023
Gate Handle - OFFSET Pull Handle - Stainless Steel in Bright Chrome Silver

Swing Gate Handle Square Plate OFFSET D HANDLE

Offset Fixed "D" Handle Kit - suits 60mm Mortice Lock.

Kit Components

  • 1 x LOCKTON Art. D-OFFSET-SC - Offset Fixed "D" Handle
  • 1 x LOCKTON Art. SQ-05V-SCP - Square End Furniture Plain Plate

PRODUCT SPECIFICATION

Plate Specifications

  • Material: Solid Brass
  • Dimensions (L x W x D): 165 x 46 x 18mm
  • Mounting Screw Spacing: 150mm

Handle Specifications

  • Material: Solid Brass
  • Handing: Non-Handed
  • 10 Year Warranty (*)
  • Clearance: 44mm (from rear of handle to door)
  • Handle Diameter: 16mm
  • Mounting Screw Spacing: 160mm
  • Screw Thread: M5
  • Supplied with 2 x Mounting Screws


$ 116.82 116.82000000000001 AUD
CPPS313
Plastic square cap 30x30mm (1-2.5mm wall thickness) White

The plastic square cap is designed for 30x30mm square tubes with a wall thickness of 1-2.5mm. It serves as a protective cover for the ends of the tubes, providing a clean and finished look. Made from high-quality plastic, this square cap offers durability and reliable performance. It is easy to install and ensures a secure fit, preventing dust, debris, and moisture from entering the tube. Whether for industrial applications, commercial projects, or DIY crafts, this plastic square cap is a versatile solution for protecting and enhancing your square tube assemblies.

$ 1.80 $ 1.18 1.18 AUD
MOT238MVK
Mains Voltage Merlin Swing A200 Double Articulated Arm Kit

Swing A 200 Articulated Arm Double Swing Gate Opener

Merlin's Swing A 200 Swing Gate Opener is suitable for residential dual swing gates up to 2.5 metres. IP44 rated, the Merlin Swing A 200 provides heavy lifting power performance for two swing gates up to:200kg for 1.5m gate150kg for 2m gate100kg for 2.5m gate Mains or Low Voltage options available.  myQ capable and Battery Backup compatible.Powerful, quiet and compliant to Australian and New Zealand Standards, enjoy complete peace of mind with 3 Year Warranty and built in premium safety reversal technology, to ensure your family and possessions are protected.Loaded with Merlin Security+2.0 encryption rolling code technology means perfect operation under all environment conditions and from a greater distance than ever before.

  • 200kg for a 1.5m gate
  • 150kg for a 2m gate
  • 100kg for a 2.5m gate

Both Mains and Low Voltage are available. This device is compatible with a battery backup as well as myQ capable. The disengagement mechanism also allows you to manually open and close the gate when needed. 

MyQ App Compatibility:

  • iPhone/ iPod Touch requires iOS 13.0 or higher
  • Apple Watch requires watchOS5.0 or higher
  • Android devices requires Android 7.0 Nougat or higher
  • Windows and Blackberry devices are not compatible


$ 1,599.09 1599.0900000000001 AUD
MKLO290
Lockwood 3772 Oval Insert Mortice Lock - 90x90 Frame, 57mm Backset, Silver - For Swing Gates

The Mortice Lock is a high-quality locking solution designed for maximum security. With a 60mm backset, this lock provides a reliable and durable mechanism for your doors and gates. The satin chrome finish adds a touch of elegance and complements various architectural styles. This lock features the Lockwood 3572 primary mortice lock, known for its strength and reliability. It offers advanced security features such as a deadlock function, ensuring that your property is well-protected. Suitable for residential, commercial, and industrial applications, the Mortice Lock is a trusted choice for those seeking robust and reliable security solutions.


Compatible with Electric striker  FK660

$ 160.86 160.86 AUD