Public Pricelist
Sort By: Featured
Accessories and Tools
Accessories and Tools
Base Plates
Base Plates
Cantilever Gate System
Cantilever Gate System
DIY Sliding Gate Kit
DIY Sliding Gate Kit
End Caps
End Caps
Fence Panels
Fence Panels
Fencing Brackets
Fencing Brackets
Fencing Spears
Fencing Spears
Floor Tracks
Floor Tracks
Gate Closers
Gate Closers
Gate Hinges
Gate Hinges
Gate Holders
Gate Holders
Gate Locks and Latches
Gate Locks and Latches
Gate Stops
Gate Stops
Gate Wheels
Gate Wheels
Gatemaster
Gatemaster
Locinox
Locinox
Motor Accessories
Motor Accessories
Post Bases
Post Bases
Rollers and Brackets
Rollers and Brackets
Sliding Gate Motors
Sliding Gate Motors
Swing Gate Motors
Swing Gate Motors
Tube Connectors
Tube Connectors
Touch Up Paints
Touch Up Paints
Wrought Iron
Wrought Iron
HN615
Galvanised Strap hinge 300x50mm LH

Galvanised Strap hinge 300x50mm LH

$ 48.50 $ 38.50 38.5 AUD
ET354
Genuine MYQ Connectivityc Bundle Kit inludes AU772 Safety Beams and M828 Waterproof IP44

Gate myQ Connectivity Bundle you can add the ability to monitor and control your gate with the myQ App while you are away from home.


Key Features:

  • The Gate myQ Connectivity includes myQ Gateway and the Outdoor Protector Systemâ„¢ (IP44 Safety IR Beams**) to protect your loved ones and belongings. 
  • Monitor and control away from home* myQ technology allows you to monitor and control your gate away from home.
  • Receive alerts and notifications Receive alerts and notifications for complete peace of mind knowing you are in control away from home.
  • Invite guests Easily invite up to five people to control your myQ devices from anywhere.
  • myQ Scheduling* With myQ Scheduling you can select specific close times for your gate.

 

 Compatibility:
  • Slide 600 (MGSK600, MGSK600-LV)
  • Grifco LG Drive 1000 (GLD GO, GLD GO-LV)
  • Swing A 200 (MGASK, MGASK-LV, MGADK, MGADK-LV)
  • Swing L 300 (MGLSK, MGLSK-LV, MGLDK, MGLDK-LV)

 MyQ App Compatibility:

  • iPhone/ iPod Touch requires iOS 13.0 or higher
  • Apple Watch requires watchOS5.0 or higher
  • Android devices requires Android 7.0 Nougat or higher
  • Windows and Blackberry devices are not compatible

Please note that the app may be installed on earlier versions, however features and functionality may not work as expected. As updated versions of the myQ App becomes available, older iOS's may no longer be compatible. Linking your myQ account to partners may require a subscription fee.

Please note: The Outdoor Protector Systemâ„¢ (IP44 Safety IR Beams) does not include any brackets or wires.

 

* The app may be installed on earlier versions, however features and functionality may not work as expected. As updated versions of the myQ App becomes available, older iOS's may no longer be compatible. Linking your myQ account to partners may require a subscription fee.

$ 184.00 184.0 AUD
ET493
Stainless steel Gate / Door Access Touchless Infrared Sensor Waterproof IP66

Stainless steel Gate / Door Access Touch-less Infrared Sensor Waterproof IP66

No Touch sensor - infrared motion detector

IP66 Rating - Weatherproof & Dustproof

$ 39.50 39.5 AUD
FK263
Swing Gate Lever Handle Euro Lock Set - 85mm Pitch Plate (Black)

The Swing Gate Lever Handle Euro Lock Set in Black Finish is a stylish and functional hardware option for swing gates. This set includes a lever handle and a Euro lock, providing secure access control for your gate. The chrome finish gives a sleek and modern look to your gate, enhancing its overall appearance. The lever handle is ergonomically designed for comfortable grip and easy operation. Constructed from high-quality materials, this lever handle set is built to withstand outdoor conditions and regular use. Upgrade your swing gate with the Swing Gate Lever Handle Euro Lock Set for a combination of style and security.

$ 86.00 86.0 AUD
GM329
Centsys D5/D10/D20 Smart Control Board

DX Smart Control Board is suitable for D5, D10, and D20 Smart

$ 529.00 529.0 AUD
BKKC746C
Tigerclamp 746 C42 DDA Assist Saddle Wall Bracket, fit 32NB pipe (42mm OD)

The TigerClamp DDA 746 Series Wall Bracket Rail Support is designed to securely hold and support 40NB pipes with a diameter of 48mm. This wall bracket is part of the DDA 746 Series, known for its durability and reliability. It is specifically designed for rail installations and provides a sturdy mounting solution for various applications. The wall bracket ensures a secure attachment to the wall, offering stability and strength to the rail system. It is constructed with high-quality materials and features a robust design that withstands heavy loads and harsh environments. This wall bracket rail support is an essential component for creating a secure and reliable railing system.

$ 29.10 29.1 AUD
FK967
Lockey 2835DC Mechanical Keyless Lever Lock with Passage Function, Double Combination (Black)

Enhance the security of your door with the Lockey 2835DC Mechanical Keyless Lever Lock. This advanced digital door lock combines the convenience of keyless entry with robust security features, ensuring peace of mind for your home or business.

The Lockey 2835DC features a double combination for added security, allowing you to customize access codes for different users. Its mechanical design eliminates the need for batteries, providing a reliable and durable solution.

Upgrade to the Lockey 2835DC for a sleek, keyless, and secure door entry experience. Trust TigerLink for quality security solutions that prioritize your safety.


Marine grade levers

SES:

  • Residential Entry Doors
  • Garage Doors
  • Interior Doors
  • Closets
  • Storage Rooms
  • Gates

FEATURES:

  • Lever handle inside and outside
  • Optional Passage Function
  • Medium duty lever handle lock
  • Easy Installation
  • Easy changeable combination
  • For right or left hand doors / changeable handing
  • Single or double combination available
  • 60mm backset deadlocking spring latch
  • Easy code change as often as required
  • Covers 54mm hole in doors from existing locks
  • Mechanical Reliability
  • Will fit onto doors or gates up to 50mm thick, or with optional extension kit available in accessories below up to 125mm thick

Image with lock fitted to weld on lock box is for display purposes only, the lockbox is not included with lock and is available from accessories below

DIMENSIONS:

  • Keypad height 140mm
  • Keypad width 42mm (boot seals are 63mm wide)
  • Lock prodtrudes from outer door face by 58mm with boot seal
  • 60mm backset
  • External keypad for entry.
  • Internal lever handle only, always free to exit.

Installation instruction 

$ 452.00 452.0 AUD
CPPS364
Plastic square Cap 75x75mm (2-4.5mm wall thickness) White

The plastic square cap is designed specifically for 75x75mm square posts, providing a secure and protective covering. With a wall thickness of 2-4.5mm, this cap offers excellent durability and resistance against external elements. It fits snugly onto the square post, effectively keeping out dust, debris, and moisture. Crafted from high-quality plastic, it ensures long-lasting performance and is suitable for various indoor and outdoor applications. Install this square cap easily to give your posts a clean and finished appearance while offering reliable protection.

$ 3.00 3.0 AUD
CPPS360
Plastic square Cap 65x65mm (2-4.5mm) White

The plastic square cap is designed for 65x65mm square posts, providing a reliable and protective covering. With a wall thickness of 2-4.5mm, this cap offers durability and resistance to external elements. It securely fits onto the square post, preventing dust, debris, and moisture from entering. The high-quality plastic material ensures long-lasting performance, making it suitable for various applications both indoors and outdoors. Install this square cap easily to give your posts a clean and finished appearance while offering reliable protection.

$ 2.95 2.95 AUD
RT375
Galvanised Curverd steel U Groove Above Ground Floor Track for Sliding Gates 1 Meters

The Galvanised Steel U-Groove Above Ground Floor Track is designed for use with sliding gates. Made of galvanised steel, it is durable and can withstand heavy use. The U-groove design ensures smooth and stable movement of the gate. It comes in 1 meter length, allowing you to customize the length according to your needs.

$ 42.75 42.75 AUD
FK359
Euro Key Barrel, 60mm Full Cylinder, Dummy Cylinder - Bright Chrome

ABUS CYL EURO DUMMY 60MM TITALIUM



Description

ABUS dummy euro cylinder.

Several fixing points allows it to replace offset euro cylinders that are 10/50, 25/35 or 30/30.

Overall length 60 mm.

Finished in Titaliumâ„¢.


$ 39.50 39.5 AUD
GMSG702
Beninca BULL424 SW 24V 450kg- Motor Kit x 3 remotes

Italian Sliding Gate Motor Beninca BULL424 SW 24V 450kg- Motor kit

 


The BULL424SW is a 24 volt motor designed for residential and commercial sliding gates up to 450kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 450KG The BULL424SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL424SW is designed for residential and commercial sliding automatic gates up to 450kg in weight.

24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 240 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Control unit with trimmers and dip-switches | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor (2 x 1.2 Ah) | Anti-crushing system with amperometric obstacle detection.

The BULL424SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.

 Motor Voltage - 24 volts DC 

Current Standby - 8mA 

Current at use - 3.2A 

Motor power - 80W 

Maximum thrust - 428N 

Operating speed - 11 metres per minute (adjustable) 

Maximum gate size - 450 kg 

Duty cycle - 80% 

Height - 330mm Width - 326mm Depth - 140mm 

Weight - 7.6 Kg 

IP rating - IP44


 

Additional information

Weight 15 kg
Motor Voltage

24 volts DC
Standby Current

8mA
Maximum Current

0.4A
Motor Power

80W
Maximum Thrust

428N
Operating Speed

11 Metres per minute
Maximum Gate Weight

400 Kg
IP Rating

IP44
Height (mm)

330mm
Width (mm)

140mm
Length (mm)

326mm
Weight (kg)

10.2 Kg
Duty Cycle

80%

Battery Back up $185Wireless Keypad $218.50


$ 690.00 $ 649.00 649.0 AUD
GMSG706
Beninca BULL624 SW 24V 600kg- Motor Kit x 3 remotes

Italian Sliding Gate Motor Beninca BULL424 SW 24V 600kg- Motor kit

 

The BULL624SW is a 24 volt motor designed for residential and commercial sliding gates up to 600kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 600KG The BULL624SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL424SW is designed for residential and commercial sliding automatic gates up to 600kg in weight.

24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 240 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Control unit with trimmers and dip-switches | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor (2 x 1.2 Ah) | Anti-crushing system with amperometric obstacle detection.

The BULL624SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.

 Motor Voltage - 24 volts DC 

Current Standby - 8mA 

Current at use - 3.2A 

Motor power - 80W 

Maximum thrust - 428N 

Operating speed - 11 metres per minute (adjustable) 

Maximum gate size - 600 kg 

Duty cycle - 80% 

Height - 330mm Width - 326mm Depth - 140mm 

Weight - 7.6 Kg 

IP rating - IP44

 

 

Additional information

Weight 15 kg
Motor Voltage

24 volts DC
Standby Current

8mA
Maximum Current

0.4A
Motor Power

80W
Maximum Thrust

428N
Operating Speed

11 Metres per minute
Maximum Gate Weight

600 Kg
IP Rating

IP44
Height (mm)

330mm
Width (mm)

140mm
Length (mm)

326mm
Weight (kg)

10.2 Kg
Duty Cycle

80%

 

$ 799.00 $ 699.00 699.0 AUD
MOT371
Beninca Single Swing Gate Motor TOM3024E Motor Kit

Beninca Single Swing Gate Motor TOM3024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL – 3.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 3 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 10 kg
Motor Voltage

24 volts DC
Standby Current

0mA
Maximum Current

5.5A
Motor Power

89W
Maximum Thrust

1800Nm
Opening Time

9-21 seconds to 90 degrees
Maximum Gate Width

3000mm
Duty Cycle

80%
Height (mm)

132mm
Width (mm)

88mm
Length (mm)

796mm
Weight (kg)

8.2 Kg
IP Rating

IP44


$ 1,095.00 1095.0 AUD
MOT372
Beninca Double Swing Gate Motor TOM3024E Motor Kit

Beninca Double Swing Gate Motor TOM3024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL – 3.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 3 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 10 kg
Motor Voltage

24 volts DC
Standby Current

0mA
Maximum Current

5.5A
Motor Power

89W
Maximum Thrust

1800Nm
Opening Time

9-21 seconds to 90 degrees
Maximum Gate Width

3000mm
Duty Cycle

80%
Height (mm)

132mm
Width (mm)

88mm
Length (mm)

796mm
Weight (kg)

8.2 Kg
IP Rating

IP44


$ 1,539.00 1539.0 AUD
MOT374
Beninca Single Swing Gate Motor TOM5024E Motor Kit

Beninca Single Swing Gate Motor TOM5024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL –5.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 5 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 9.4 kg
Motor Voltage

24 volts DC
Standby Current

0mA
Maximum Current

5.5A
Motor Power

89W
Maximum Thrust

1500Nm
Opening Time

19"
Maximum Gate Width

5000mm
Duty Cycle

80%
Height (mm)

114mm
Width (mm)

96mm
Length (mm)

1575mm
Weight (kg)

9.4 Kg
IP Rating

IP44


$ 1,395.00 1395.0 AUD
MOT375
Beninca Double Swing Gate Motor TOM5024E Motor Kit

Beninca Double Swing Gate Motor TOM5024E Motor Kit


The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.

24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL –5.0 METRE LEAF

The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.

Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions

It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.

•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 5 metres long.

•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.

•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.

HIGH-QUALITY COMPONENTS
The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.

COMPACT DESIGN
Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.

EASY ACCESS TO MECHANICAL STOPS
The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.

FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY
The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.

Additional information

Weight 9.4 kg
Motor Voltage

24 volts DC
Standby Current

0mA
Maximum Current

5.5A
Motor Power

89W
Maximum Thrust

1500Nm
Opening Time

19"
Maximum Gate Width

5000mm
Duty Cycle

80%
Height (mm)

114mm
Width (mm)

96mm
Length (mm)

1575mm
Weight (kg)

9.4 Kg
IP Rating

IP44

 

$ 1,795.00 $ 1,779.00 1779.0 AUD
1001002030B
Duragal Steel 100x100x2.0mm 3000mm long Black

Duragal Steel 100x100x2.0mm 3000mm long Black

$ 118.00 118.0 AUD
FK341
Mortice Lock - Primary mortice, 60mm backset, Satin Chrome

The Mortice Lock is a high-quality locking solution designed for maximum security. With a 60mm backset, this lock provides a reliable and durable mechanism for your doors and gates. The satin chrome finish adds a touch of elegance and complements various architectural styles. This lock features the Lockwood 3572 primary mortice lock, known for its strength and reliability. It offers advanced security features such as a deadlock function, ensuring that your property is well-protected. Suitable for residential, commercial, and industrial applications, the Mortice Lock is a trusted choice for those seeking robust and reliable security solutions.


Compatible with Electric striker  FK660

$ 69.95 69.95 AUD
ET365
Centsys Photon Smart Fully wireless PE Safety Beams

Centsys Photon Smart Fully wireless PE Safety Beams

Main features:

  • Connects wirelessly to your SMART solution – saves time and money
  • Pair and align in seconds
  • Beautifully styled – adds an air of sophistication to your swing or sliding gate
  • Outstanding reliability offering up to 2 years of battery life
  • Long range – brings safety to even the widest entrance gates
  • Fully sealed unit – prevents insect ingress
  • Can be easily added to sites with existing hard-wired beam sets

Technical Specifications:
Power supply 2 x AA Alkaline Batteries1 (supplied for each transmitter and receiver)
Battery life >2 years
Battery-low indication Notified via MyCentsys Pro Mobile Application
Maximum operating distance 30m
Alignment between beams2 Automatic – 1m circle @ 10m
Maximum Operating Distance Photon SMΔRT Receiver to SMΔRT Controller 10m
Operating temperature -15°C to +65°C
Operating humidity 0 - 90° (non-condensing)
Housing material ABS
Lens material PC
Degree of Protection IP54
Packaging weight 200g
Packaging dimensions Length: 137mm Width: 72mm Height: 58mm


Brochure Click

Installation  Click

$ 189.50 189.5 AUD