The 360 Spring Coil Gate Closer is a reliable and versatile solution for automatically closing gates. This gate closer is designed to provide controlled closing action, ensuring that your gate is securely closed after each use.

With the 360-degree spring coil design, this gate closer offers an even and balanced closure from any angle. It is suitable for various types of gates, including garden gates, pedestrian gates, and small access gates. The spring coil mechanism provides consistent closing force, ensuring that the gate closes smoothly without slamming.

Installation of the gate closer is straightforward and can be easily mounted on most gate systems. It is designed for both left-handed and right-handed gates, providing flexibility in installation. The silver finish adds a sleek and modern touch to your gate's appearance.

The 360 Spring Coil Gate Closer is a reliable and versatile solution for automatically closing gates. This gate closer is designed to provide controlled closing action, ensuring that your gate is securely closed after each use.

With the 360-degree spring coil design, this gate closer offers an even and balanced closure from any angle. It is suitable for various types of gates, including garden gates, pedestrian gates, and small access gates. The spring coil mechanism provides consistent closing force, ensuring that the gate closes smoothly without slamming.

Installation of the gate closer is straightforward and can be easily mounted on most gate systems. It is designed for both left-handed and right-handed gates, providing flexibility in installation. The silver finish adds a sleek and modern touch to your gate's appearance.

Swing Gate Handle Square Plate OFFSET D HANDLE with Cylinder Hole

Offset Fixed "D" Handle Kit - suits 60mm Mortice Lock.

Kit Components

• 1 x LOCKTON Art. D-OFFSET-SC - Offset Fixed "D" Handle
• 1 x  LOCKTON Art. SQ-04V-SCP - Square End Furniture Plate w/ Cylinder Hole

PRODUCT SPECIFICATION

Plate Specifications

• Material: Solid Brass
• Dimensions (L x W x D): 165 x 46 x 18mm
• Mounting Screw Spacing: 150mm

Handle Specifications

• Material: Solid Brass
• Handing: Non-Handed
• 10 Year Warranty (*)
• Clearance: 44mm (from rear of handle to door)
• Handle Diameter: 16mm
• Mounting Screw Spacing: 160mm
• Screw Thread: M5
• Supplied with 2 x Mounting Screws

The Internal Sliding Gate Wheel Rollers are designed to provide smooth and effortless sliding gate operation. These rollers feature a white nylon wheel with a 90mm diameter, which reduces friction and ensures quiet operation. The rollers are mounted on a stainless steel bracket, providing durability and resistance to corrosion. With their U-groove design, these rollers are suitable for various types of sliding gates. Whether it's for residential or commercial use, these rollers offer reliable performance and ease of use.

Hold weight up to 100kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Cutting machine
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

• Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
• The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

The Internal Sliding Gate Wheel Rollers are designed to provide smooth and effortless sliding gate operation. These rollers feature a white nylon wheel with a 60mm diameter, which reduces friction and ensures quiet operation. The rollers are mounted on a stainless steel bracket, providing durability and resistance to corrosion. With their U-groove design, these rollers are suitable for various types of sliding gates. Whether it's for residential or commercial use, these rollers offer reliable performance and ease of use.

Hold weight up to 60kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Cutting machine
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

• Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
• The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

The Internal Sliding Gate Wheel Rollers are designed to provide smooth and effortless sliding gate operation. These rollers feature a white nylon wheel with a 100mm diameter, which reduces friction and ensures quiet operation. The rollers are mounted on a stainless steel bracket, providing durability and resistance to corrosion. With their U-groove design, these rollers are suitable for various types of sliding gates. Whether it's for residential or commercial use, these rollers offer reliable performance and ease of use.

Hold weight up to 120kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Cutting machine
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

• Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
• The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

The Internal Sliding Gate Wheel Rollers are designed to provide smooth and effortless sliding gate operation. These rollers feature a white nylon wheel with a 60mm diameter, which reduces friction and ensures quiet operation. The rollers are mounted on a stainless steel bracket, providing durability and resistance to corrosion. With their U-groove design, these rollers are suitable for various types of sliding gates. Whether it's for residential or commercial use, these rollers offer reliable performance and ease of use.

Hold weight up to 60kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Cutting machine
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

• Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
• The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

The Butt Hinges are a set of two stainless steel hinges with a fixed pin design. Measuring 100x70x2.5mm, these hinges provide reliable support and smooth operation for doors, cabinets, and other applications. Made from high-quality stainless steel, they offer excellent durability and resistance to rust and corrosion. The fixed pin ensures stability and security, making them suitable for both residential and commercial use. Whether you're working on a renovation project or building new furniture, the Butt Hinges deliver reliable performance and long-lasting functionality.

Stainless Steel 304 Swing / Sliding Gates Pull Handle

• Material: 304 Stainless steel
• Color: Stainless steel finished
• Size: 120x40mm
• Recessed size:  95x31x10mm
• Accessories: Screws

Stainless Steel 304 Swing / Sliding Gates Pull Handle

• Material: 304 Stainless steel
• Color: Black finished
• Size: 102x51mm
• Recessed size: 83x38x10mm 
• Accessories: Screws

Swing Gate Stainless steel PULL and Push PLATE with Handle Black

LOCKTON PPP-SET-SS - Contains one of each Stainless Steel "Push" Plate & "Pull" Plate.

Fixing holes on each plate allows handles to be mounted either back to back or at different heights if needed. 

Supplied in a box with fixing screws. Often also used to cover existing holes & or damage to doors.

PRODUCT SPECIFICATION

• Material: Stainless Steel
• Finish: Black
  
• Thickness: 1.5mm each
• Dimensions: 300mm x 100mm each
• Pull Handle Protrusion: 60mm
• Pack Quantity: 2 x Plates (1 x Push, 1 x Pull)
• 19mm Diameter Pull Handle
• Fixing Screws provided

Swing Gate Stainless steel PULL and Push PLATE with Handle

LOCKTON PPP-SET-SS - Contains one of each Stainless Steel "Push" Plate & "Pull" Plate.

Fixing holes on each plate allows handles to be mounted either back to back or at different heights if needed. 

Supplied in a box with fixing screws. Often also used to cover existing holes & or damage to doors.

PRODUCT SPECIFICATION

• Material: Stainless Steel
• Thickness: 1.5mm each
• Dimensions: 300mm x 100mm each
• Pull Handle Protrusion: 60mm
• Pack Quantity: 2 x Plates (1 x Push, 1 x Pull)
• 19mm Diameter Pull Handle
• Fixing Screws provided

Swing Gate Stainless steel PULL PLATE with Handle Black

PRODUCT DESCRIPTION

LOCKTON PPP-PULL-SS - Stainless Steel "Pull" Plate.

PRODUCT SPECIFICATION

• Material: Stainless Steel
• Thickness: 1.5mm
• Dimensions: 300 x 100mm
• Pull Handle Protrusion: 60mm
• Pack Quantity: 1 x Plate
• 19mm Diameter Pull Handle
• Often also used to cover existing holes or damage to doors

Swing Gate Stainless steel PULL PLATE with Handle

PRODUCT DESCRIPTION

LOCKTON PPP-PULL-SS - Stainless Steel "Pull" Plate.

PRODUCT SPECIFICATION

• Material: Stainless Steel
• Thickness: 1.5mm
• Dimensions: 300 x 100mm
• Pull Handle Protrusion: 60mm
• Pack Quantity: 1 x Plate
• 19mm Diameter Pull Handle
• Often also used to cover existing holes or damage to doors