The 360 Spring Coil Gate Closer is a reliable and versatile solution for automatically closing gates. This gate closer is designed to provide controlled closing action, ensuring that your gate is securely closed after each use.

With the 360-degree spring coil design, this gate closer offers an even and balanced closure from any angle. It is suitable for various types of gates, including garden gates, pedestrian gates, and small access gates. The spring coil mechanism provides consistent closing force, ensuring that the gate closes smoothly without slamming.

Installation of the gate closer is straightforward and can be easily mounted on most gate systems. It is designed for both left-handed and right-handed gates, providing flexibility in installation. The silver finish adds a sleek and modern touch to your gate's appearance.

If you're in need of a touch-up paint for your metal surfaces, our Shale Grey Touch-Up Paint is the perfect solution. This high-quality paint is designed to provide a long-lasting finish that resists chipping, fading, and peeling, and it's perfect for use on everything from vehicles and machinery to metal furniture and fixtures.

The BFT Kustos Ultra BT B40 Single Swing Gate Motor Kit is a reliable and efficient solution for automating your single swing gate. 

Maximum Gate Width & Weights

Max Weight : 700kg per leaf
Max Width of Gate: 4m per leaf
Max Width WITHOUT Electric Lock: 3m per leaf

Kit Includes

1 x BFT Kustos Ultra B40 24V DC

2 x Remotes

1 x Flashing Light

1 x Safety Sensor

1 x Clonix Receiver

1 x 3-pin Plug

1 x Control Board (240V)

The BFT Kustos Ultra BT B25 Single Swing Gate Motor Kit (240V) is a reliable and efficient solution for automating your single swing gate. 

Maximum Gate Width & Weights

Max Weight : 400kg per leaf
Max Width of Gate: 3m per leaf
Max Width WITHOUT Electric Lock: 2m per leaf

Kit Includes

1 x BFT Kustos Ultra B25 24V DC

2 x Remotes

1 x Flashing Light

1 x Safety Sensor

1 x Clonix Receiver

1 x 3-pin Plug

1 x Control Board (240V)

The Internal Sliding Gate Wheel Rollers are designed to provide smooth and effortless sliding gate operation. These rollers feature a white nylon wheel with a 100mm diameter, which reduces friction and ensures quiet operation. The rollers are mounted on a stainless steel bracket, providing durability and resistance to corrosion. With their U-groove design, these rollers are suitable for various types of sliding gates. Whether it's for residential or commercial use, these rollers offer reliable performance and ease of use.

Hold weight up to 120kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Cutting machine
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

• Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
• The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.