Sort By: Newest Arrivals
Accessories and Tools
Accessories and Tools
Base Plates
Base Plates
Cantilever Gate System
Cantilever Gate System
DIY Sliding Gate Kit
DIY Sliding Gate Kit
End Caps
End Caps
Fence Panels
Fence Panels
Fencing Brackets
Fencing Brackets
Fencing Spears
Fencing Spears
Floor Tracks
Floor Tracks
Gate Closers
Gate Closers
Gate Hinges
Gate Hinges
Gate Holders
Gate Holders
Gate Locks and Latches
Gate Locks and Latches
Gate Stops
Gate Stops
Gate Wheels
Gate Wheels
Gatemaster
Gatemaster
Letter Boxes
Letter Boxes
Locinox
Locinox
Motor Accessories
Motor Accessories
Post Bases
Post Bases
Rollers and Brackets
Rollers and Brackets
Sliding Gate Motors
Sliding Gate Motors
Swing Gate Motors
Swing Gate Motors
Tube Connectors
Tube Connectors
Touch Up Paints
Touch Up Paints
Wrought Iron
Wrought Iron
TigerTech
TigerTech
Overhead Sliding Gate System
Overhead Sliding Gate System
Round Pipe Fitting
Round Pipe Fitting
Fence Posts
Fence Posts
FK484
Locinox LAKY F2 Small Ornamental Swing Gate Lock F2 Square profile adjustable 40-50mm

Small Ornamental Swing Gate Lock F2 Square profile adjustable 40-50mm

Ornamental lock with aluminium housing and stainless steel mechanism. We advise this lock as a standard for all your ornamental gates. The 10 mm continuous adjustability of the bolts allows a perfect alignment of your locking mechanism. A solid stainless steel deadbolt with a 23 mm throw guarantees a secure locking. Standard supplied with zamac ornamental handle pair.

  • ISO 9227 KTL / E-coated lockbox withstands 1000 hours of salt spray test
  • Easy left or right changing of the self-latching daybolt
  • Throw of the deadbolt, 23 mm in 1 turn of the key
  • Adjustment of the bolts up to 10 mm continuous without dismounting the lockbox
  • Key-operated self-latching bolt
  • 4-hole fixing with two hexagon socket head screws
  • Center distance bolts: 60 mm

Tigerlink Hardware

Call us now 1300 055 099 or Email: sales@tigerlink.com.au

$ 149.55 149.55 AUD
LB005
Slim metal Letter Box Raw

The Slim Metal Letter Box in raw finish is a sleek and modern solution for your mail reception needs. Made from high-quality metal, this letter box is designed to withstand outdoor elements while maintaining its durability. The slim profile makes it easy to install on walls or fences, saving space and providing a clean aesthetic. It features a secure lock system to keep your mail safe and protected. The raw finish adds a contemporary touch to any home or office exterior. Upgrade your mail collection experience with the Slim Metal Letter Box.

Measurements: 375mm(H)x365mm(L)x125mm(D)
Weight 3 Kg

$ 75.00 75.0 AUD
WH194
Sliding Gate Side Roller Bracket - 150x40mm Black Roller, Silver Holding Bracket

The Wh394 Sliding Gate Single Roller is a high-quality accessory designed to ensure smooth and efficient operation of sliding gates. With a roller size of 150x40mm and a sturdy bracket measuring 150x60mm, this single roller provides reliable support for your sliding gate system. The durable construction and precision engineering ensure long-lasting performance even in harsh outdoor conditions. The accompanying bracket adds stability and strength to the roller, further enhancing its functionality. Upgrade your sliding gate with the Wh394 Sliding Gate Single Roller for improved convenience and performance.

$ 29.55 29.55 AUD
MOT502
Sliding gate motor pinion gear Fast (V) for BFT Motor for BTA Motor

The MOT502 Sliding Gate Motor Pinion Gear Fast V is specifically designed for BFT BTA motors, offering a reliable and efficient solution for your sliding gate system. This pinion gear features a fast V shape, allowing for quick and smooth gate operation. Crafted with precision and durability in mind, it ensures optimal performance and longevity. Upgrade your BFT motor with the MOT502 Sliding Gate Motor Pinion Gear Fast V for enhanced gate automation.

$ 86.36 86.36 AUD
WH250
Sliding Gate Guide Roller Set - 165x60mm Silver Bracket, 40x45mm White Rollers

The WH250 Sliding Gate Top Guide Holder with 2 Rollers is designed to provide reliable support and smooth operation for sliding gates. This holder features a sturdy construction with a size of 40x60mm and includes two rollers that ensure effortless gate movement. The rollers minimize friction and enhance the overall performance of the gate system. Made from high-quality materials, the holder is durable and built to withstand outdoor conditions. Upgrade your sliding gate with the WH250 Sliding Gate Top Guide Holder for improved functionality and ease of use.

$ 35.36 35.36 AUD
WH226
Sliding Gate Guide Roller Set - 150x60mm Silver Bracket, 40x30mm Black Rollers

The WH226 Sliding Gate Top Guide Holder with 2 Rollers is a versatile solution for guiding and supporting sliding gates. This holder features a robust design with a size of 150x60mm and includes two rollers measuring 40x30mm each. The rollers ensure smooth and stable gate movement, minimizing friction and enhancing overall gate performance. The holder is made from durable materials to withstand outdoor conditions and provides reliable support for your sliding gate system. Upgrade your gate with the WH226 Sliding Gate Top Guide Holder for improved functionality and ease of use.

$ 15.27 15.27 AUD
ET355
Sliding Gates or Swing Gates Safety Reflector beam kit with protector hood for Merlin & Grifco Wire Free

Sliding Gates or Swing Gates Safety Reflector beam kit with protector hood for Merlin & Grifco

 



$ 271.82 271.82 AUD
WH395
Sliding Gate Wheel/Rollers for U Groove 100mm Internal - Double Bearing

The WH395 Sliding Gate Wheel is a high-quality and durable solution for smooth and efficient movement of your sliding gate. With its U-groove design and 100mm internal diameter, this wheel provides excellent stability and support. The double-bearing system ensures smooth and silent operation, minimizing friction and wear. Upgrade your gate system with the WH395 Sliding Gate Wheel for reliable performance and enhanced convenience.

Hold weight up to 350kg 

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Cutting machine
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

  • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
  • The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 27.23 27.23 AUD
WH375
Sliding Gate Wheel for U Groove 80mm Internal -Double Bearing

The WH375 Sliding Gate Wheel is designed to provide smooth and reliable movement for your sliding gate. With its U-groove design, 80mm internal diameter, and double bearing mechanism, this wheel ensures enhanced performance and durability. It is compatible with U-groove tracks and offers easy installation and adjustment. Upgrade your sliding gate system with the WH375 Sliding Gate Wheel for effortless and efficient operation.

Hold weights up to 350kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Cutting machine
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

  • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
  • The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 19.09 19.09 AUD
WH472
Sliding Gate Wheel V Groove Dounble bearing 58mm Dia

Sliding Gate Wheel V Groove Dounble bearing 58mm Dia

This v groove track wheel is 58mm in diameter and has double bearing.

Technical Specifications.

  • Groove Type- V Groove
  • Load Capacity- 120 Kg
  • Wheel Diameter- 58mm
  • Wheel Material- Steel
  • Finish- Zinc Plated
$ 13.18 13.18 AUD
WH475
Sliding Gate Wheel V Groove Double bearing 68mm Dia

Sliding Gate Wheel V Groove Double bearing 68mm Dia

This v groove track wheel is 78mm in diameter and has double bearing.

Technical Specifications.

  • Groove Type- V Groove
  • Load Capacity- 100 Kg
  • Wheel Diameter- 68mm
  • Wheel Material- Steel
  • Finish- Zinc Plated

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 11.09 11.09 AUD
WH465
Sliding Gate Wheel V Groove Double bearing 45mm Dia

Sliding Gate Wheel V Groove Dounble bearing 45mm Dia

This v groove track wheel is 45mm in diameter and has double bearing.

Technical Specifications.

  • Groove Type- V Groove
  • Load Capacity-100Kg
  • Wheel Diameter- 45mm
  • Wheel Material- Steel
  • Finish- Zinc Plated

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 12.18 12.18 AUD
WH354
Sliding Gate Wheel U Groove 80mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 80mm 2 wheels with bracket Double bearing

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 68.18 68.18 AUD
WH350
Sliding Gate Wheel U Groove 60mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 60mm 2 wheels with bracket Double bearing

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 44.55 44.550000000000004 AUD
WH356
Sliding Gate Wheel U Groove 100mm 2 wheels with bracket Double bearing

Sliding Gate Wheel U Groove 100mm 2 wheels with bracket Double bearing



$ 71.36 71.36 AUD
WH405
Sliding Gate U Groove Wheel 100mm Diametre no bracket

The WH405 Sliding Gate U-Groove Wheel with a 100mm diameter is a high-quality component designed for smooth and efficient operation of your sliding gate. With its U-groove design and Class A rating, this wheel offers excellent traction and durability. The wheel does not include a bracket, providing flexibility for mounting options. Upgrade your sliding gate system with the WH405 Sliding Gate U-Groove Wheel for reliable performance and long-lasting durability.


Hold weight up to 300kg

$ 19.09 19.09 AUD
WH110
Sliding Gate Guide Roller - 25x40mm, M12 Bolt, Black

The Wh110 Sliding Gate Top Guide Roller is a heavy-duty accessory designed for sliding gates. With a size of 25x40mm, this top guide roller provides smooth and reliable guidance for your gate. It is made of durable nylon material, ensuring long-lasting performance. The Wh110 Guide Roller is designed for easy installation and is suitable for heavy gates. The black color adds a sleek and modern touch to your gate. Upgrade your sliding gate with this heavy-duty top guide roller for smooth and effortless operation.

$ 6.18 6.18 AUD
WH287
Sliding Gate Guide Roller Set - 210x225mm Silver Bracket, 40x60mm Black Rollers

The WH287 Sliding Gate Top Guide Holder with 2 Rollers is a reliable and efficient solution for your sliding gate system. This guide holder offers stable support and smooth gate operation. It comes with two rollers measuring 40x60-110mm, ensuring optimal gate movement and reduced friction. The durable construction and high-quality materials make it suitable for outdoor use. Upgrade your sliding gate with the WH287 Top Guide Holder for improved performance and convenience.

$ 38.18 38.18 AUD
WH255
Sliding Gate Guide Roller Set - 200x160mm Silver Bracket, 40x100mm Black Rollers

The WH255 Sliding Gate Top Guide Holder with 2 Rollers is a versatile and reliable accessory for your sliding gate system. With a size of 200x162mm, this guide holder provides stable support and smooth operation. It comes with two rollers measuring 40x100mm, ensuring effortless gate movement and reducing friction. The durable construction and high-quality materials make it suitable for outdoor use. Upgrade your sliding gate with the WH255 Top Guide Holder for improved performance and reliability.

$ 35.27 35.27 AUD
WH288
Sliding Gate Guide Roller Set - 210x225mm Black Bracket, 40x60mm Black Rollers

The WH288 Sliding Gate Top Guide Holder with 2 Rollers is a high-quality solution for your sliding gate system. With a size of 212x225mm and a maximum gate width of 75mm, this guide holder offers reliable support and smooth gate operation. It comes with two rollers measuring 40x60mm, ensuring optimal gate movement and reduced friction. The black finish adds a sleek and modern touch to your gate design. Upgrade your sliding gate with the WH288 Top Guide Holder for enhanced functionality and style.

$ 40.00 40.0 AUD