Sort By: Newest Arrivals
Accessories and Tools
Accessories and Tools
Cantilever Gate System
Cantilever Gate System
DIY Sliding Gate Kit
DIY Sliding Gate Kit
End Caps
End Caps
Fence Panels
Fence Panels
Fencing Brackets
Fencing Brackets
Fencing Spears
Fencing Spears
Gate Closers
Gate Closers
Gate Hinges
Gate Hinges
Gate Holders
Gate Holders
Gate Locks and Latches
Gate Locks and Latches
Gate Stops
Gate Stops
Gate Tracks
Gate Tracks
Gate Wheels
Gate Wheels
Gatemaster
Gatemaster
Locinox
Locinox
Motor Accessories
Motor Accessories
Overhead Sliding Gate System
Overhead Sliding Gate System
Post Bases
Post Bases
Rollers and Brackets
Rollers and Brackets
Sliding Gate Motors
Sliding Gate Motors
Swing Gate Motors
Swing Gate Motors
TigerTech
TigerTech
Touch Up Paints
Touch Up Paints
Tube Clamps
Tube Clamps
Tube Connectors
Tube Connectors
Wrought Iron
Wrought Iron
SE856
Square Steel Base Plate, 170x170x8mm, 4 Holes

Looking for a heavy-duty base plate for your construction project? Our Square Base Plate is the perfect solution! Made from high-grade steel, this base plate provides superior strength and durability, ensuring maximum safety and stability for your structural columns and beams.

With a size of 170x170x8mm, our base plate offers ample surface area for secure attachment to your columns or beams. Its square shape and sturdy construction make it suitable for even the most demanding applications.


$ 10.55 10.55 AUD
SE855
Square Steel Base Plate, 170x170x5mm, 4 Holes

Looking for a heavy-duty base plate for your construction project? Our Square Base Plate is the perfect solution! Made from high-grade steel, this base plate provides superior strength and durability, ensuring maximum safety and stability for your structural columns and beams.

With a size of 170x170x5mm, our base plate offers ample surface area for secure attachment to your columns or beams. Its square shape and sturdy construction make it suitable for even the most demanding applications.


$ 7.95 7.95 AUD
GC674
Aluminium Spring Arm Gate Closer - 40kg, Up To 850mm - Silver

Spring Arm Door Closer - Max Weight 40kg for Maximum 850mm Wide Doors


  • For wood and aluminium doors
  • Spring resistance 250,000 cycles
  • Supports up to 40kg for a 850mm wide door
  • Torsion spring not coil
  • Variable door closing strength
  • Highly efficient 90º working aperture
  • Quick and simple installation
  • No periodical greasing required

The MS674 Spring Arm Door Closer in silver is a versatile and dependable solution for ensuring smooth and controlled door closing. This door closer is designed to provide consistent closing action, making it ideal for both residential and commercial applications.

With its sleek silver finish, the MS674 complements various door styles and designs. It features adjustable closing speed and latching action, allowing you to customize the door closing experience based on your specific needs. Whether you want a gentle close or a more secure latch, this door closer delivers.


The MS674 Spring Arm Door Closer offers reliable performance and durability, built to withstand frequent use and various weather conditions. It is suitable for interior and exterior doors, providing convenience and safety for both home and business environments.

Choose the MS674 Silver Spring Arm Door Closer for reliable door closing performance. Shop at TigerLink for high-quality door hardware and accessories.




$ 78.18 78.18 AUD
GM179
BFT Spare Part - Back Replacement BFT I200058 10002 (Pair)

Back Replacement BFT I200058 10002 (Pair)

$ 153.64 153.64000000000001 AUD
GM187
BFT Spare Part - Wormscrew Nylon Gear for BFT Phobos Screw Nut

Spare Part Nylon BFT Phobos Screw Nut

$ 20.68 20.68 AUD
GM197
BFT Spare Part - Deimos ULTRA Magnetic Limit Switches


$ 80.91 80.91 AUD
ET780
Spare Key for All type of Centsys Sliding Gate Motors

Release Key & Spare Key for All Centsys Centurion Sliding Gate motors 

Spare Key for All type of Centsys Sliding Gate Motors

$ 13.18 13.18 AUD
WH367
Zinc Plated Sliding Gate Wheel - 60mm U Groove Internal - Double Bearing

Description

Introducing the U-Groove Sliding Gate Wheel Rollers, the ideal solution for smooth and efficient operation of your sliding gate. These rollers are specifically designed for U-groove tracks, ensuring a secure fit and reliable performance.

Featuring a 60mm internal diameter and equipped with double bearings, these gate wheel rollers provide exceptional stability and durability. The double bearings allow for effortless movement, reducing friction and ensuring a quiet and smooth sliding motion.

Crafted from high-quality materials, these gate wheel rollers are built to withstand the elements and heavy use. They are resistant to rust and corrosion, making them suitable for outdoor applications. Whether you have a residential or commercial sliding gate, these rollers are designed to handle the job with ease.

Installation is quick and straightforward. Simply place the U-groove sliding gate wheel rollers onto the track, and you're ready to enjoy effortless gate operation. The smooth movement and reliable performance of these rollers will enhance the convenience and functionality of your sliding gate system.

Upgrade your sliding gate with the U-Groove Sliding Gate Wheel Rollers and experience the benefits of smooth and reliable operation. Enjoy the convenience and peace of mind knowing that your gate will open and close effortlessly every time.

Double Bearing support Max capacity weight 200 kg per wheel

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Cutting machine
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

  • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
  • The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 14.09 14.09 AUD
WH375
Zinc Plated Sliding Gate Wheel - 80mm U Groove Internal - Double Bearing

The WH375 Sliding Gate Wheel is designed to provide smooth and reliable movement for your sliding gate. With its U-groove design, 80mm internal diameter, and double bearing mechanism, this wheel ensures enhanced performance and durability. It is compatible with U-groove tracks and offers easy installation and adjustment. Upgrade your sliding gate system with the WH375 Sliding Gate Wheel for effortless and efficient operation.

Hold weights up to 350kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Cutting machine
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

  • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
  • The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 17.73 17.73 AUD
WH476
Zinc Plated Sliding Gate Wheel - 78mm V Groove External - Double Bearing

Sliding Gate Wheel V Groove Double bearing 78mm Dia

This v groove track wheel is 78mm in diameter and has double bearing.

Technical Specifications.

  • Groove Type- V Groove
  • Load Capacity- 120 Kg
  • Wheel Diameter- 78mm
  • Wheel Material- Steel
  • Finish- Zinc Plated

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 20.82 20.82 AUD
WH472
Zinc Plated Sliding Gate Wheel - 58mm V Groove External - Double Bearing

Sliding Gate Wheel V Groove Dounble bearing 58mm Dia

This v groove track wheel is 58mm in diameter and has double bearing.

Technical Specifications.

  • Groove Type- V Groove
  • Load Capacity- 120 Kg
  • Wheel Diameter- 58mm
  • Wheel Material- Steel
  • Finish- Zinc Plated
$ 13.18 13.18 AUD
WH475
Zinc Plated Sliding Gate Wheel - 68mm V Groove - Double Bearing

Sliding Gate Wheel V Groove Double bearing 68mm Dia

This v groove track wheel is 78mm in diameter and has double bearing.

Technical Specifications.

  • Groove Type- V Groove
  • Load Capacity- 100 Kg
  • Wheel Diameter- 68mm
  • Wheel Material- Steel
  • Finish- Zinc Plated

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 11.09 11.09 AUD
WH479
Zinc Plated Sliding Gate Wheel - 80mm V Groove Internal - Double Bearing

Sliding Gate Wheel V80  internal Double bearing

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Cutting machine
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

Prepare the Gate and Track:

  • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
  • The track should be level and secure to ensure smooth operation.

Step One:
Measure the sliding gate wheel cradle, ensuring there's enough space to attach the wheel to the steel frame. Use a cutting wheel to make the cut, but first, drill four holes (one in each corner) using an 8-10mm drill bit. This will ensure the square hole is clean in each corner.

Step Two:
Clean up the rectangular hole with a file to ensure smooth edges, then spray the area with galvanized paint for protection.

Step Three:
Place the sliding gate wheel into the cut-out and check that it can rotate freely. Ensure there’s enough space for securing the wheel with a tek screw.

Step Four:
When screwing in the tek screws, make sure the wheel is aligned with the edge of the steel. The last thing you want is for the wheel to be out of alignment. Avoid welding the wheel if possible, as this can make replacement more difficult later on.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later


$ 23.09 23.09 AUD
WH377
Zinc Plated Sliding Gate Wheel - 80mm U Groove External - Double Bearing

The WH377 Sliding Gate Wheel is designed to provide reliable and efficient operation for your sliding gate. With its U-groove design and 80mm external diameter, this wheel offers excellent stability and support. The double-bearing system ensures smooth and effortless movement, reducing friction and wear. Upgrade your sliding gate with the WH377 Sliding Gate Wheel for enhanced performance and convenience.

Hold weight up to 190kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

  • Sliding gate wheel 
  • Measuring tape
  • Drill and drill bits
  • Screws and bolts 
  • Wrench or screwdriver

Steps for Installation:

  1. Prepare the Gate and Track:
    • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
    • The track should be level and secure to ensure smooth operation.
  2. Determine the Wheel Placement:
    • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
    • The wheel’s placement is important for proper weight distribution and gate stability.
  3. Mark the Drill Holes:
    • Hold the wheel brackets against the gate at the desired position.
    • Use a measuring tape to ensure the placement is even and at the correct height.
    • Mark the holes where the screws or bolts will go to secure the wheels.
  4. Drill the Holes:
    • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
    • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
  5. Attach the Wheel Bracket:
    • Secure the wheel bracket to the gate using the screws or bolts.
    • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
  6. Install the Wheel:
    • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
    • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
  7. Test the Gate:
    • Test the sliding gate by moving it along the track.
    • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
  8. Adjust if Necessary:
    • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
    • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

$ 19.09 19.09 AUD
FS742
Sliding Gate Track Fasteners Zipfix 40mm x 6mm - Each

The Sliding Gate Track Fasteners Zipfix are designed for use with sliding gates. These fasteners are made of durable materials and are built to withstand heavy use. They measure 40mm x 6mm and are sold individually.

$ 1.09 1.09 AUD
SGSB420B
Steel Sliding Gate Holder/Catcher for Gates 75mm, Black


$ 13.45 13.450000000000001 AUD
SGSB407
Steel Sliding Gate Holder/Catcher for Gates 50mm, Mounting Bracket Zinc Plated

The SGSB407 Sliding Gate Holder with Mounting Bracket is designed for use with 50mm tubes. It provides secure support and easy installation for sliding gates. The sliding gate holder features a durable construction and a mounting bracket for convenient attachment to the gate structure. With its sturdy design and reliable performance, the SGSB407 Sliding Gate Holder with Mounting Bracket is an ideal choice for your sliding gate system.

$ 25.00 25.0 AUD
SGSB414
Steel Sliding Gate Holder/Catcher for Gates 75mm, Rubber Stop

The SGSB414 Sliding Gate Holder is specifically designed for 75mm gates, providing a reliable and secure solution for holding and guiding sliding gates. It features a rubber component that ensures smooth and quiet operation, reducing friction and wear on the gate. The sliding gate holder is easy to install and offers durability for long-term use. With its sturdy construction and functional design, the SGSB414 Sliding Gate Holder is an essential component for your sliding gate system.

$ 14.09 14.09 AUD
WH555
Sliding Block for Sliding Gate Nylon Guide size 75mm Black

The WH555 Sliding Block for Sliding Gate is a high-quality nylon guide designed to enhance the performance of your sliding gate system. With a size of 75mm, this sliding block provides smooth and reliable gate movement while reducing friction. The black color adds a sleek and modern touch to your gate design. Upgrade your sliding gate with the WH555 Sliding Block for improved functionality and a stylish appearance.

$ 15.32 15.32 AUD
WH556
Sliding Block for Sliding Gate Nylon Guide size 75mm White

The WH556 Sliding Block for Sliding Gate is a high-quality nylon guide designed to enhance the performance of your sliding gate system. With a size of 75mm, this sliding block provides smooth and reliable gate movement while reducing friction. The white color complements various gate designs and adds an elegant touch to your property. Upgrade your sliding gate with the WH556 Sliding Block for improved functionality and a visually appealing appearance.

$ 15.42 15.42 AUD