Beninca Double Swing Gate Motor TOM5024E Motor Kit
The TOM series of motors is made by Italian company Beninca which translates into quality, reliability and performance. The TOM range uses linear shaft technology for added length and strength and 24 volt DC motors.
24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL –5.0 METRE LEAF
The powerful 24 volt swing gate electro mechanical operator. What makes TOM so special (and yes a little more expensive than most) is just below the top shaft cover. Easily accessible and adjustable mechanical stops. That along with ability to wire encoders makes the TOM highly adaptable to difficult sites where physical stops may be a problem to install. The TOM is a non reversible operator with key operated manual override but one of the main benefits of the 24 volt motor is the ability to use battery backup meaning you may never have to use the manual override key.
Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum. The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the actuator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions
It is possible to use a variety of control boards to control the TOM but the factory designed board is the BRAINY which can be used as a one or two motor controller with a host of programmable parameters.
•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 5 metres long.
•TOM features adjustable mechanical stops for opening and closing, patented FACE gears and a bronze release wheel with customised key.
•The 24 Vdc version, also guarantees standby power consumption of less than 0.8 W.
HIGH-QUALITY COMPONENTS The release wheel is made of bronze to maximise its life, reliability, and operation. The worm gear is protected by a wiper seal and a stainless-steel shaft, making it suitable for use in dusty, sandy or harsh environments.
COMPACT DESIGN Thanks to its compact dimensions, just 96 mm wide, TOM adapts to any situation. The 45° inclination of the cable also means that the operator can be installed flush with the floor.
EASY ACCESS TO MECHANICAL STOPS The adjustable stops at the top are accessible once the metal cover has been slid back. These stops slide on rails and can be easily fixed in the desired position using screws.
FASTENERS DESIGNED FOR MAXIMUM ADAPTABILITY The rear articulation, which can be fixed in three positions, reduces space requirements by adjusting for any misalignment of the panel during movement. The alignment of the front and rear brackets also ensures better load distribution by reducing bending, guaranteeing axial thrust and optimising operator life.
24 volts DC
0mA
5.5A
89W
1500Nm
19"
5000mm
80%
114mm
96mm
1575mm
9.4 Kg
IP44
Beninca Single Swing Gate Motor TOM5024E Motor Kit
Beninca Double Swing Gate Motor TOM3024E Motor Kit
24 VOLT ELECTRIC GATE OPERATOR – RESIDENTIAL & COMMERCIAL – 3.0 METRE LEAF
•At just 96 cm wide, the TOM telescopic linear motor for swing gates to 3 metres long.
1800Nm
9-21 seconds to 90 degrees
3000mm
132mm
88mm
796mm
8.2 Kg
Beninca Single Swing Gate Motor TOM3024E Motor Kit
The BULL624SW is a 24 volt motor designed for residential and commercial sliding gates up to 600kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 600KG The BULL624SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL424SW is designed for residential and commercial sliding automatic gates up to 600kg in weight. 24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 240 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Control unit with trimmers and dip-switches | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor (2 x 1.2 Ah) | Anti-crushing system with amperometric obstacle detection. The BULL624SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.
Motor Voltage - 24 volts DC
Current Standby - 8mA
Current at use - 3.2A
Motor power - 80W
Maximum thrust - 428N
Operating speed - 11 metres per minute (adjustable)
Maximum gate size - 600 kg
Duty cycle - 80%
Height - 330mm Width - 326mm Depth - 140mm
Weight - 7.6 Kg
IP rating - IP44
8mA
0.4A
80W
428N
11 Metres per minute
600 Kg
330mm
140mm
326mm
10.2 Kg
The BULL424SW is a 24 volt motor designed for residential and commercial sliding gates up to 450kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 450KG The BULL424SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL424SW is designed for residential and commercial sliding automatic gates up to 450kg in weight. 24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 240 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Control unit with trimmers and dip-switches | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor (2 x 1.2 Ah) | Anti-crushing system with amperometric obstacle detection. The BULL424SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.
Maximum gate size - 450 kg
400 Kg
Battery Back up $185Wireless Keypad $218.50
The Self-Closing Badass Hinge Set is specifically designed for gates weighing up to 140 kg, The face mount, self-closing gate hinge offers a full 180º gate opening for an unobstructed passage, with gate gaps as small as 13mm. Weld-on and bolt-on models available. Horizontally adjustable, 13mm to 25mm gate gap offers heightened security and a symmetrical balance when installed with small gap latches. No greasing or maintenance required on sealed bearings
Opens to 180° for unobstructed pass through• Achieve gate gaps as small as 13mm• Horizontally adjustable from 13mm to 25mm for precise installation• Both weld-on and bolt-on models available• No greasing or maintenance required on sealed bearings. EVER!• Horizontal adjustability is ideal for panic bar installations• 5 tension-adjustment settings• Self-closing maximum gate weight: 200kg (with 2 closers) CI3825FM• Self-closing maximum gate weight: 140kg (with a closer and plain hinge set CI3850FM)
The Self-Closing Badass Hinge Set is specifically designed for gates weighing up to 140 kg, The bolt-on, self-closing gate hinges are easy to install and adjust for perfect installation. Compatible for use on aluminium gates for non-welding and high-traffic gates to ensure correct movement. Horizontally adjustable for perfect installations that ensures proper gate function. The Bolt-On BadAss was designed to be used on gates where welding the hinges to the gate and the end post is not an option.
Opens to 180° for unobstructed pass through• Achieve gate gaps as small as 13mm• Horizontally adjustable from 13mm to 25mm for precise installation• Both weld-on and bolt-on models available• No greasing or maintenance required on sealed bearings. EVER!• Horizontal adjustability is ideal for panic bar installations• 5 tension-adjustment settings• Self-closing maximum gate weight: 200kg (with 2 closers) CI3835FM • Self-closing maximum gate weight: 140kg (with a closer and plain hinge set) CI3860FM
The Sunbury Aluminium Capital is a stunning architectural element designed to enhance the beauty of columns and pillars. Made from high-quality aluminum, this capital showcases a unique and eye-catching design that adds a touch of elegance to any architectural project. With its intricate detailing and precise craftsmanship, the Sunbury Aluminium Capital creates a focal point that captures attention and elevates the visual appeal of the space. Whether used in residential or commercial applications, this capital is built to withstand the test of time, ensuring durability and long-lasting performance. Transform your columns and pillars into works of art with the Sunbury Aluminium Capital.
The Neutral Tension Gate Hinge is designed for gates weighing up to 28kg and features a no alignment leg design. The absence of alignment legs simplifies the installation process and allows for flexible positioning. With its durable construction, the Neutral Tension Gate Hinge offers long-lasting performance. Whether for residential or light commercial use, this hinge is an excellent choice for smaller gates.
Hold weights up to 28kg
Engineered Polymers, Rust Resistang Stainless-Steel Pins & Springs
Vertical
Black
28
No Legs
Metal or Timber Gates, Pool Gates
The Swing Gate Hinges Shackle Weld-on Hinges are heavy-duty hinges designed for swing gates that require strength and reliability. With a 20mm pin size, these hinges offer robust performance and smooth gate operation. The shackle design helps prevent gate sagging and ensures proper alignment. These hinges are sold as a pair and feature a weld-on installation for secure and permanent attachment. Suitable for industrial and commercial applications, the Swing Gate Hinges Shackle Weld-on Hinges provide long-lasting durability and reliable gate functionality.
Colour: Dark Grey
Hold weights up to 600kg
Installation instruction for Weld on hinges
To make sure your gate is secure :
Tip: Measure correctly before welding. If need to change anything you will need to cut them off and re-weld them again.
Please contact us for Bulk price & availability
The Swing Gate Hinge Adjustable is a high-quality hinge designed for swing gates. It features a 20mm pin with a rotating mechanism, allowing for easy adjustment and precise alignment of the gate. The pair of hinges ensures stability and smooth operation of the gate. Crafted with durability in mind, this hinge is built to withstand outdoor conditions. Upgrade your swing gate with the Swing Gate Hinge Adjustable for enhanced functionality and convenience.
Hold weights up to 150kg
ABUS dummy euro cylinder.
Several fixing points allows it to replace offset euro cylinders that are 10/50, 25/35 or 30/30.
Overall length 60 mm.
Finished in Titalium™.
The Gatemaster Super Lock is a double-sided keypad designed to fit 40-60mm gate frames. With its durable construction and user-friendly keypad, this lock provides enhanced security and convenient access control for your gate. The double-sided keypad allows authorized individuals to enter a personal code for easy and controlled entry.
Download PDF
The Aluminium Spear Top Female is a versatile and attractive accessory designed for 19mm round tubes. With its sleek and contemporary design, it adds a touch of elegance to your fencing system. The female spear top is made from high-quality aluminium, ensuring durability, lightweight, and resistance to rust and corrosion. It is easy to install and fits seamlessly with various applications, making it suitable for both residential and commercial projects. Upgrade your fence with the Aluminium Spear Top Female and enjoy a stylish and long-lasting solution.
Material : Aluminum mill finished
Dimensions: 135(H)x80(W) for 19mm round tube
The WH195 Top Guide Roller for Sliding Gate is a reliable and functional accessory designed to improve the performance of sliding gates. With a size of 200x40mm and a sturdy holding bracket, this guide roller ensures smooth and effortless operation for your gate. It is constructed with high-quality materials to ensure durability and long-lasting performance. The WH190 Guide Roller is specifically designed to provide reliable guidance and support for sliding gates. The holding bracket adds extra stability and security to the installation. Upgrade your sliding gate system with this top guide roller for optimal functionality.
Heavy Duty Swing Gate Barrel Weld on Hinges designed for swing gates that require strength and reliability. these hinges offer robust performance and smooth gate operation. The shackle design helps prevent gate sagging and ensures proper alignment. These hinges are sold as a pair and feature a weld-on installation for secure and permanent attachment. Suitable for industrial and commercial applications, the Swing Gate Hinges Shackle Weld-on Hinges provide long-lasting durability and reliable gate functionality.
Hold weights up to 1000kg