The Sliding Gate Wheel is designed to provide smooth and reliable operation for your sliding gate. With its U-groove design and 40mm external diameter, this wheel offers excellent stability and support. The double-bearing system ensures smooth and effortless movement, reducing friction and wear. Upgrade your sliding gate with the WH369 Sliding Gate Wheel for enhanced performance and convenience.

Hold weight up to 60kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

1. Prepare the Gate and Track:
   • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
   • The track should be level and secure to ensure smooth operation.
2. Determine the Wheel Placement:
   • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
   • The wheel’s placement is important for proper weight distribution and gate stability.
3. Mark the Drill Holes:
   • Hold the wheel brackets against the gate at the desired position.
   • Use a measuring tape to ensure the placement is even and at the correct height.
   • Mark the holes where the screws or bolts will go to secure the wheels.
4. Drill the Holes:
   • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
   • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
5. Attach the Wheel Bracket:
   • Secure the wheel bracket to the gate using the screws or bolts.
   • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
6. Install the Wheel:
   • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
   • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
7. Test the Gate:
   • Test the sliding gate by moving it along the track.
   • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
8. Adjust if Necessary:
   • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
   • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

The  Steel Sliding Gate 360° Turn Wheel is a durable and versatile solution for your sliding gate system. With its U-groove design and 60mm external diameter, this wheel allows for smooth and effortless 360° turning motion. The double-bearing system ensures reliable performance and minimizes friction. Crafted from high-quality steel, this wheel is built to withstand heavy loads and provide long-lasting durability. Upgrade your sliding gate with the  Steel Sliding Gate 360° Turn Wheel for enhanced functionality and convenience.

Hold weight up to 180kg

Installing a sliding gate wheel involves a few key steps to ensure the gate operates smoothly. Here’s a step-by-step guide to help you install it:

Materials Needed:

• Sliding gate wheel 
• Measuring tape
• Drill and drill bits
• Screws and bolts 
• Wrench or screwdriver

Steps for Installation:

1. Prepare the Gate and Track:
   • Before installing the wheels, ensure that your sliding gate is already installed and that the sliding track is properly laid out.
   • The track should be level and secure to ensure smooth operation.
2. Determine the Wheel Placement:
   • Decide where the wheel brackets will go on the gate. Typically, the wheels should be placed at the bottom of the gate. Depending on the gate size.
   • The wheel’s placement is important for proper weight distribution and gate stability.
3. Mark the Drill Holes:
   • Hold the wheel brackets against the gate at the desired position.
   • Use a measuring tape to ensure the placement is even and at the correct height.
   • Mark the holes where the screws or bolts will go to secure the wheels.
4. Drill the Holes:
   • Drill holes at the marked points on the gate, making sure the holes are large enough for the screws or bolts provided in your wheel kit.
   • If you’re installing a single wheel, the hole placement should be centered along the gate's width.
5. Attach the Wheel Bracket:
   • Secure the wheel bracket to the gate using the screws or bolts.
   • Tighten them properly to ensure the bracket is secure. Be sure the wheel can rotate freely once attached.
6. Install the Wheel:
   • If the wheel is separate from the bracket, slide the wheel into its bracket or mounting system.
   • Tighten any screws or bolts holding the wheel in place, ensuring it rotates easily and is properly aligned.
7. Test the Gate:
   • Test the sliding gate by moving it along the track.
   • Check that the wheels glide smoothly without any obstruction or resistance. The gate should be stable and move freely.
8. Adjust if Necessary:
   • If the gate isn’t sliding smoothly, check the alignment of the wheels and track. You might need to adjust the wheel height or ensure that the track is level.
   • Make sure the wheels are aligned with the gate and track to avoid any friction.

Try not to weld them onto the sliding gate frame it will be a nightmare to replace them later

The plastic square cap is designed for 65x65mm square posts, providing a reliable and protective covering. With a wall thickness of 2-4.5mm, this cap offers durability and resistance to external elements. It securely fits onto the square post, preventing dust, debris, and moisture from entering. The high-quality plastic material ensures long-lasting performance, making it suitable for various applications both indoors and outdoors. Install this square cap easily to give your posts a clean and finished appearance while offering reliable protection.

The WH392 Steel Sliding Gate 360° Turn Wheel is a durable and versatile solution for your sliding gate system. With its Y-groove design and 60mm external diameter, this wheel allows for smooth and effortless 360° turning motion. The double-bearing system ensures reliable performance and minimizes friction. Crafted from high-quality steel, this wheel is built to withstand heavy loads and provide long-lasting durability. Upgrade your sliding gate with the WH392 Steel Sliding Gate 360° Turn Wheel for enhanced functionality and convenience.

Hold weight up to 180kg

The Steel Knock-in Bearing Hinges are designed specifically for 65x65mm steel tube applications, providing a reliable and robust hinge solution for your gates or doors. This package includes a pair of hinges, offering the necessary hardware for secure and smooth operation.

Featuring a knock-in design, these hinges are easy to install by aligning them with the pre-drilled holes on your steel tube and tapping them in securely. The bearing feature ensures smooth movement and reduced friction, allowing for effortless opening and closing of your gates or doors.

The Steel Knock-in Bearing Hinges are engineered to fit 65x65mm steel tubes precisely, ensuring a snug and secure fit for optimal performance. These hinges provide sturdy support and stability, enhancing the durability and functionality of your steel tube applications.

Hold weights up to 350kg

The WH399 Stainless Steel Sliding Gate 360° Turn Wheel is a versatile component designed to enhance the functionality of your sliding gate system. With its Y-groove design and 60mm diameter, this wheel provides smooth and precise movement, allowing your gate to rotate freely. Made from stainless steel, it offers exceptional durability and resistance to corrosion. The external double-bearing mechanism ensures effortless operation and long-lasting performance. Whether for residential or commercial applications, this stainless steel sliding gate wheel is a reliable choice for optimal gate functionality.

The Locinox Mortice Lock H Metal is a high-quality lock designed for securing doors with its reliable functionality and enhanced security features. With a 35mm backset, this lock is suitable for various door applications. The lock-only option allows you to replace your existing lock or integrate it into a new door system. It is crafted with durability in mind, ensuring long-lasting performance and peace of mind. Upgrade your door's locking system with the Mortice Lock H Metal for added security and convenience.

The ET360 Radius B LTA24 R1 Lampeg Stand is a high-quality stand designed for BFT gate systems. This lampeg stand provides a sturdy and secure mounting solution for gate control accessories such as photocells, safety beams, or other compatible devices. With a height of 4 meters, it offers an optimal position for effective monitoring and detection. The ET360 lampeg stand features a durable construction that ensures stability and longevity, even in demanding environments. It is designed to complement BFT gate systems and enhance their functionality and safety. Upgrade your gate system with the ET360 Radius B LTA24 R1 Lampeg Stand for reliable and convenient accessory mounting.