Low Voltage Centsys D5 Evo Smart Kit
The plastic square end cap tube insert is designed specifically for 25x25mm square tubes with a wall thickness of 1-3mm. This tube insert serves as a protective cover for the ends of the tubes, providing a clean and finished look. Made from high-quality plastic, it offers durability and reliable performance. The tube insert is easy to install and provides a secure fit, preventing dust, debris, and moisture from entering the tube. Whether for industrial applications, commercial projects, or DIY crafts, this square end cap tube insert is a versatile solution for protecting and enhancing your square tube assemblies.
The plastic square cap is designed for 32x32mm square tubes with a wall thickness of 1-3.5mm. It serves as a protective cover for the ends of the tubes, offering a clean and finished appearance. Made from high-quality plastic, this square cap provides durability and reliable performance. It is easy to install and ensures a secure fit, effectively preventing dust, debris, and moisture from entering the tube. Whether for industrial applications, commercial projects, or DIY crafts, this plastic square cap is a versatile solution for protecting and enhancing your square tube assemblies.
TigerTech is a powerful mains voltage motor designed for heavy lifting power performance with a 1000KG maximum load. It is suitable for sliding gates up to 8 meters.
Aside from being IP44 rated, this motor is easily controllable through the XHouse app, available in various devices. This means that once connected via WiFi or Bluetooth, the gate can be opened and closed electronically.
Enjoy complete peace of mind with 2 Years Warranty.
Key Features:
Soft Start and Stop – Ensures smooth gate operation with gradual acceleration and deceleration.
Speed Adjustment – Lets you fine-tune the gate’s opening and closing speeds for optimal performance.
LCD Display – Enables quick and intuitive setup and programming.
Pedestrian Mode – Offers customizable partial gate opening for pedestrian access.
Electronic Control System – Can run gate operations through the XHouse app.
240V Mains Power – Also available in a low voltage option for versatile installation needs.
Battery Backup – Can operate even during power outages.
Quiet DC Motor – Low-noise, vibration-free operation with smooth and silent performance.
IP44 Weather Resistant – Suitable for outdoor installation, IP44-rated for protection against dust and water.
Supports Sliding Gates up to 8 Metres
Power supply
AC 110V/220V±10% 50Hz/60Hz
Motor power
DC 24V
Maximum load
1000KG
Rated power
130W
Gate moving speed
26 cm/second
Output gear module
M=4
Output gear number
Z=16
Remote control distance
≤30 meters
Working humidity
≤85%
Noise
Protection Class
IP44
Working temperature of motor
-25℃ ~ +50℃
Experience the ultimate convenience and security with the Merlin Slide 600 Low Voltage Gate Motor - Merlin MGSK600-LV. This powerful and reliable gate opener from Merlin is designed to effortlessly automate your sliding gate. With its low voltage operation, it ensures energy efficiency and safe operation. The Merlin MGSK600-LV delivers exceptional performance, capable of handling gates up to 600 kg. Trust Tigerlink, your gate hardware supplier, to provide you with high-quality products that enhance the functionality and security of your gate system. Upgrade to Merlin Slide 600 Low Voltage and enjoy seamless gate automation like never before.
For more info: SOL003
Height of the top tooth of pinion gear from the ground
- with base plate: 132 mm
Next Generation Genuine Merlin 4 button remote with ability to code both Merlin Security+ & Merlin Security+ 2.0. Courtesy green LED Light flash for confirmation of function.Compatible with any Merlin garage door opener manufactured since 2009.
Compatible with:
Merlin garage door opener models:Commander Essential (MS65MYQ), Commander Elite (MS105MYQ), Commander Extreme (MS125MYQ), SilentDrive™ Essential (MR655MYQ), SilentDrive™ Elite (MR855MYQ), Commander Ultimate (MJ3800MYQ), Commander MyQ, WhisperDrive, TiltMaster, PowerAce, CyclonePro, OverDrive, SilentDrive Elite MyQ, SilentDrive BBU, SilentDrive Pro, QuietDrive Pro, WeatherDrive, MJ3800BBU, MT800, MT600, MT1000, MT3850, MT5580P, MT60P, MT60, MT230, RollerAce (MR60), MR600, MR800, MR1000, MJ3800, MJ3800R and all other Merlin Security+and Security+ 2.0 garage door openers
Merlin gate opener models:Slide 600 (MGSK600, MGSK600-LV), Swing A 200 (MGASK, MGASK-LV, MGADK, MGADK-LV) Swing L 300 (MGLSK, MGLSK-LV, MGLDK, MGLDK-LV)
Automatic Wireless Vehicle Micro E-Loop Kit
The e-Loop Micro offers a fantastic low-cost solution to domestic gate control, offering a simple installation, impressive battery life for the form factor and a discreet and sleek design. Packaged with an e-Trans 20 as an all-in-one solution, the e-Loop Micro kit is the perfect product for any gate installer; offering a reasonably priced to up-sell a vehicle detection on a traditional gate installation.
Compact Profile – Height: 27mm | Diameter: 110mm
The e-Loop Micro’s Vehicle Detection System relies on magnetometer sensors to detect approaching vehicles. Upon detection, the system transmits this information to a nearby Microtech transceiver, facilitating gate activation/traffic control. Installation involves affixing sensors to the surface of entry or exit passages using dyna-bolts. These sensors are designed to withstand the rigors of vehicle traffic.
Kit Content:
- 1 x e-Loop Wireless Detection Module
- 1 x 12-24VDC Single Channel Transceiver (e Trans 20)
- 2 x Concrete screws
Automatic Wireless Vehicle Post Mount E-Loop Kit
Ideal for demanding environments, the e-Loop in-ground features all the functionality of the commercial with the added advantage of a in-ground installation. Perfect for low clearance vehicles, forklifts, tracked vehicles and heavy equipment.
- 1 x 12-24VDC Single Channel Transceiver
- 2 x Fixing screws
Automatic Wireless Vehicle Detector In-Ground E-Loop Gate Automation - Commercial Kit with Radar
Presence Mode loops offer the next level in vehicle detection; with the addition of a radar sensor an array of extra functionality is added. Upon activation by the magnetometer, a radar read is initiated confirming that the detection is in fact a vehicle. With this functionality, the loop can hold a given relay open when a vehicle is present, detect a parked vehicle and . These advanced sensors decrease potential for tampering.
The ET268 Cover Shell for RFID Fingerprint Access Control Keypad is designed to provide protection and durability to your access control keypad. With its rain black color and waterproof design, it ensures that the keypad is resistant to water and adverse weather conditions, making it suitable for both indoor and outdoor installations. This cover shell is specifically designed to fit the RFID fingerprint access control keypad, providing a seamless and secure housing for your access control system. It helps to prolong the lifespan of the keypad and ensures reliable performance in any environment. Upgrade your access control system with the ET268 Cover Shell for enhanced protection and peace of mind.
Outside Dimensions: 237x115x87mm
Inside Dimensions:225x102x80mm
Internal Transformer for Low Voltage D5 Smart Evo & D3 Smart
This durable and essential 3-pin power cable is designed for powering your gate automation system. The cable connects your control board to a standard wall socket, with the third pin providing a crucial earth connection for safety and protection. A reliable component for ensuring your gate operates securely. This component must only be installed by a certified electrician.
Replacement control board for Beninca 624 Turbo and 1224 Turbo
Kit Includes:
Beninca 624SW x 1
Beninca Low Voltage Box x 1
Beninca Low Voltage Connector x 1
Beninca Remotes x 3
Lugs down nylon racks x 4
The BULL624SW is a 24 volt motor designed for residential and commercial sliding gates up to 600kg in weight. 24 VOLT ELECTRIC GATE OPERATOR - RESIDENTIAL - 600KG The BULL624SW by Beninca is plain and simple Beninca quality and reliability throughout. The BULL624SW is designed for residential and commercial sliding automatic gates up to 600kg in weight. The BULL624SW has a built in control board in its own seperate enclosure with a dedicated 433mhz wireless receiver and inputs for photocells and switches etc. The BULL also comes with a base plate. Battery backup is optional with the addition of the battery module and two 1.3Ah rechargeable batteries.
Battery Back upWireless Keypad
NEW LokkLatch® DELUXE Series 3 model is even better, stronger and faster to install. It is the ultimate privacy and security gate latch for homes and industrial areas. It operates and locks from both sides of the gate, and so eliminates the need for padlocks, chains or handle-holes in gates. The LokkLatch DELUXE S3 is made of super-strong, rust-free polymers and stainless steel components, so it’s tough and durable. Side-fixing legs provide easy fitting alignment and extra fixing strength. The two-part design provides an 'External Access Button' that allows street-side entry. Conveniently, the two security lock cylinders can be rekeyed to match other household doors and accesses. (See your locksmith prior to latch installation.) The LokkLatch® DELUXE S3 also offers vertical and horizontal adjustment to ensure proper fit and reliable operation. It can be fitted to all square-posted gates (up to 150mm deep) and can be adapted to left- or right-swinging gates.
Premium privacy and security gate latch with external access
• Operates & locks from both sides of gate• New fitting jig provides easier, faster installation• New ball-joint Connecting Rod quickens installation• Requires only one drilled hole through post• Dual 6-pin locks can be rekeyed to match doors etc.• Includes 125mm & 150mm connector rods (a spare if needed)• Vertically & horizontally adjustable• Industrial-strength polymer construction• 316 marine-grade stainless components• Fits fence posts 38–150mm deep• Long striker (for large gate gaps) with Kwikset key available as special order