Name: Universal Radio Receiver 433-868 MHz for Came, Liftmaster,Hormann HSM, Marantec
Brand selector: With 8 dip switches user can make different combination for different remote brands.
It can worrk with many main different brands in the market, like FAAC, BFT, DITEC, CAME, HORMMAN, BENINCA, MHOUSE, NICE….
Multi frequency: 300-868mhz
Learn Button and LED: There are 2 independent channels. Each channel has independent learn button S1, S2 and L1, L2.
Power Input Selector: This receiver can work at AC/DC 12V~30V.
However, it’s better to change the PIS according to the power input.
If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V
Distance: 50-100 meters
Very mini size: 5.5cm*4.5cm*1.0cm
One receiver can work with 400 codes
It don’t interference other remotes and receivers
Compatible brands: nice flors, Marantec 433.92mhz, FAAC SLH
rolling code 433.92mhz and 868mhz, liftmaster 310, 390, 433.92mhz,
315mhz, Hormann and Marantec, Berner 868mhz, Prastel, Clemsa Mastercode
433.92mhz, DITEC 433 and 315mhz, V2, Aprimatic, JCM GO 868MHZ, JCM TECH,
PNC, FORSA, ALMA, ROPER 868MHZ, BFT, FACC… and many other main brands
in the market
Programming a new remote
1) First, select the correct brand for remote that will be entry (by dip switch)
2) Press the learning button 1 or 2, the corresponding LED turns on
3) Press the button on the remote, the led 1 or led 2 flashes4 times, the remote button is learned successfully
2 independent relays
Delete code:
Press and hold either learn button. The LED will start flash. Keep
this button pressed, until the LED will turn off. All saved data in the
memory card will be erased permanently and can not be recovered
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
